Academic Staff

  Assoc.Professor Gökhan Açıkbaş
Profile
:
Department
:
Faculty of Engineering/Department of Metallurgical and Materials Engineering .
Business Address
:
Mersin Üniversitesi Fen Bilimleri Enstitüsü Nanoteknoloji Ve Ileri Malzemeler Abd .
Phone
:
+90 -324-3610001 .
Internal
:
17500 .
Fax
:
+90 -- .
Created
:
2020-11-23 21:43:53 .
Last Modification
:
2024-02-26 19:08:45 .
Researcher ID :
Scopus ID :
Orcid ID :
Scholar ID :
h-index :
8
Publons ID :
Point :

Degree Department/Program Institute Year
BACHELOR MATERIALS SCIENCE AND ENGINEERING ANADOLU UNIVERSITY 2002
MASTER SCIENCE CERAMIC ENGINEERING ANADOLU UNIVERSITY 2007
MASTER SCIENCE(WITHOUT THESIS) INDUSTRIAL ENGINEERING(ENGINEERING MANAGEMENT) ESKISEHIR OSMANGAZI UNIVERSITY 2009
PHD MATERIAL SCIENCE AND ENGINEERING DUMLUPINAR UNIVERSITY 2016
Doctorate Thesis

1. Development and characterization of polymer matrix composite materials alternative to ceramic sanitarywares, Supervisor: Dr. Hasan Göçmez, Dumlupınar University, Graduate School of Natural and Applied Sciences, Materials Science and Engineering Department, Kütahya, Turkey, 2016.

https://tez.yok.gov.tr/UlusalTezMerkezi/tezSorguSonucYeni.jsp">https://tez.yok.gov.tr/UlusalTezMerkezi/tezSorguSonucYeni.jsp

Master Thesis

1. Master without Thesis, Supervisor: Dr. Müjgan Sağır, Eskişehir Osmangazi University, Graduate School of Natural and Applied Sciences, Industrial Engineering Department, Eskişehir, Turkey, 2009.

2. Developments of micromorphology on ceramic surfaces, Supervisor: Dr. Ferhat Kara, Anadolu University, Graduate School of Natural and Applied Sciences, Ceramic Engineering Department, Eskişehir, Turkey, 2007.

https://tez.yok.gov.tr/UlusalTezMerkezi/tezSorguSonucYeni.jsp">https://tez.yok.gov.tr/UlusalTezMerkezi/tezSorguSonucYeni.jsp

Title Institute Year
LECTURER BILECIK SEYH EDEBALI UNIVERSITY 2011-09-23 - 2017-02-13
ASSISTANT PROFESSOR BILECIK SEYH EDEBALI UNIVERSITY 2017-02-13 - 2018-03-06
ASSISTANT PROFESSOR BILECIK SEYH EDEBALI UNIVERSITY 2018-03-06 - Continue
ASSOCIATE PROFESSOR BILECIK SEYH EDEBALI UNIVERSITY 2018-11-21 - Continue
Title Dutie Institution/Other Year
ASSOC.PROF.DR. BOLOGNA UNIT COORDINATOR MERSIN UNIVERSITY-NANOTECHNOLOGY AND ADVANCED MATERIALS A.B.D. 2021-07-09 - Continue
ASSOCIATE PROFESSOR HEAD OF DEPARTMENT BILECIK SEYH EDEBALI UNIVERSITY 2019-08-30 - Continue
ASSISTANT PROFESSOR VOCATIONAL SCHOOL QUALITY COMMISSION MEMBER BILECIK SEYH EDEBALI UNIVERSITY 2017-02-22 - Continue
ASSOCIATE PROFESSOR ACADEMIC INCENTIVE APPLICATION AND REVIEW COMMISSION MEMBER BILECIK SEYH EDEBALI UNIVERSITY 2020-01-03 - 2021-10-03
ASSISTANT PROFESSOR ACADEMIC INCENTIVE APPLICATION AND REVIEW COMMISSION MEMBER BILECIK SEYH EDEBALI UNIVERSITY 2016-12-30 - 2019-12-30
International - Covered by ULAKBIM 0
2018
3. ÇALIŞ AÇIKBAŞ, N.; YAMAN, B.; AÇIKBAŞ, G. . SELCUK UNIVERSITY JOURNAL OF ENGINEERING ,SCIENCE AND TECHNOLOGY, 2018, 6, 55-69. 0 + 0
10.15317/Scitech.2018.115

2. AÇIKBAŞ, G.; ÇALIŞ AÇIKBAŞ, N. . ANADOLU UNIVERSITY JOURNAL OF SCIENCE AND TECHNOLOGY A - APPLIED SCIENCES AND ENGINEERING, 2018, 19, 356-367. 0 + 0
10.18038/aubtda.381251

2017
1. ÖZCAN, S.; ÇALIŞ AÇIKBAŞ, N.; AÇIKBAŞ, G. . ANADOLU UNIVERSITY JOURNAL OF SCIENCE AND TECHNOLOGY A - APPLIED SCIENCES AND ENGINEERING, 2017, 18, 122-122. 0 + 0
10.18038/aubtda.300424

International - SCI/SCI-Expanded category 17250
2024
19. AÇIKBAŞ, G.; ÇALIŞ AÇIKBAŞ, N.; UBAY, E.; Karaer, H. . APPLIED PHYSICS A, 2024, 130, -. 950 + 0
10.1007/s00339-024-07546-z

18. AÇIKBAŞ, G.; Sezer, K.; ÖZCAN, S.; ÇALIŞ AÇIKBAŞ, N. . POLYMER BULLETIN, 2024, 81, 6207-6224. 950 + 0
10.1007/s00289-023-04994-0

17. AÇIKBAŞ, G.; Hindi, H. . SPRINGER SCIENCE AND BUSINESS MEDIA LLC, 2024, 34, 419-429. 1000 + 0
10.1007/s10904-023-02842-2

2023
16. TOKLU, Y.; ÇALIŞ AÇIKBAŞ, N.; AÇIKBAŞ, G.; ÇERÇEVİK, A.; AKPINAR, P. . ELSEVIER BV, 2023, 72, 565-576. 700 + 0
10.1016/j.asr.2023.03.035

2022
15. AÇIKBAŞ, G.; ÇALIŞ AÇIKBAŞ, N. . JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 2022, 105, 873-887. 1000 + 0
10.1111/jace.18149

14. AÇIKBAŞ, G.; ÇALIŞ AÇIKBAŞ, N.; YAMAN ISLAK, B.; AYAS, E.; GÜRCAN BAYRAK, K.; ATAMAN, A. . CERAMICS INTERNATIONAL, ELSEVIER BV, 2022, 48, 13260-13270. 850 + 0
10.1016/j.ceramint.2022.01.204

2021
13. AÇIKBAŞ, G.; ÇALIŞ AÇIKBAŞ, N. . APPLIED PHYSICS A, 2021, 127, -. 1000 + 0
10.1007/s00339-021-04938-3

12. AÇIKBAŞ, G.; ÇALIŞ AÇIKBAŞ, N. . JOURNAL OF ASIAN CERAMIC SOCIETIES, 2021, 9, 734-744. 1000 + 0
10.1080/21870764.2021.1915563

2020
11. ÇALIŞ AÇIKBAŞ, N.; YAMAN ISLAK, B.; AÇIKBAŞ, G. . MATERIALS TESTING, 2020, 62, 1251-1258. 1000 + 0
2019
10. AÇIKBAŞ, G.; YAMAN, B. . IRANIAN POLYMER JOURNAL, 2019, 28, 21-29. 1000 + 0
10.1007/s13726-018-0675-9

2018
9. AÇIKBAŞ, G.; ÖZCAN, S.; ÇALIŞ AÇIKBAŞ, N. . POLYMER COMPOSITES, 2018, 39, 4080-4093. 1000 + 0
10.1002/pc.24471

8. ÖZCAN, S.; AÇIKBAŞ, G.; ÇALIŞ AÇIKBAŞ, N. . APPLIED SURFACE SCIENCE, 2018, 438, 136-146. 1000 + 0
10.1016/j.apsusc.2017.08.014

7. ÇALIŞ AÇIKBAŞ, N.; TÜRE, Y.; Gürlek, E.; ÖZCAN, S.; SOYLU, Ş.; AÇIKBAŞ, G.; Güdü, T. . ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING, 2018, 43, 1383-1394. 300 + 0
10.1007/s13369-017-2872-9

6. AÇIKBAŞ, G. . MATERIALS TESTING, 2018, 60, 510-518. 1000 + 0
10.3139/120.111176

2017
5. AÇIKBAŞ, G.; GÖÇMEZ, H. . MATERIALS TESTING, 2017, 59, 1067-1074. 1000 + 0
10.3139/120.111111

4. ÇALIŞ AÇIKBAŞ, N.; AÇIKBAŞ, G. . WASTE AND BIOMASS VALORIZATION, 2017, 8, 669-678. 1000 + 0
10.1007/s12649-016-9651-9

3. GÖKDAİ, D.; AKPINAR BORAZAN, A.; AÇIKBAŞ, G. . WASTE AND BIOMASS VALORIZATION, 2017, 8, 1855-1862. 1000 + 0
10.1007/s12649-017-9856-6

2. ÖZCAN, S.; AÇIKBAŞ, G.; ÖZBAY, N.; ÇALIŞ AÇIKBAŞ, N. . CERAMICS INTERNATIONAL, 2017, 43, 10057-10065. 850 + 0
10.1016/j.ceramint.2017.05.024

2014
1. ÇALIŞ AÇIKBAŞ, N.; Teğmen, S.; ÖZCAN, S.; AÇIKBAŞ, G. . CERAMICS INTERNATIONAL, 2014, 40, 3611-3618. 650 + 0
10.1016/j.ceramint.2013.09.064

International - Other 400
2022
4. AÇIKBAŞ, G. . EL-CEZERI: JOURNAL OF SCIENCE AND ENGINEERING, 2022, 9, 335-349. 100 + 0
10.31202/ecjse.975684

2018
3. KARADAĞ, M.; AÇIKBAŞ, G. . SCHOLARS JOURNAL OF ENGINEERING AND TECHNOLOGY, 2018, 6, 58-63. 100 + 0
10.36347/sjet.2018.v06i02.003

2. AÇIKBAŞ, G.; KARADAĞ, M. . SCHOLARS BULLETIN, 2018, 4, 213-221. 100 + 0
10.21276/sb.2018.4.2.12

2017
1. AÇIKBAŞ, G.; GÖÇMEZ, H. . SCHOLARS BULLETIN, 2017, 3, 617-624. 100 + 0
10.21276/sb.2017.3.11.11

National - Covered by ULAKBIM 800
2024
4. AÇIKBAŞ, G.; ÇALIŞ AÇIKBAŞ, N. . OSMANIYE KORKUT ATA UNIVERSITESI FEN BILIMLERI ENSTITUSU DERGISI, 2024, 7, 543-562. 200 + 0
10.47495/okufbed.1317733

2021
3. AÇIKBAŞ, G.; KAYALI, M.; ÇALIŞ AÇIKBAŞ, N. . MUHENDISLIK BILIMLERI VE TASARIM DERGISI, 2021, 9, 240-254. 200 + 0
10.21923/jesd.768493

2019
2. YAMAN, B.; AÇIKBAŞ, G.; ÇALIŞ AÇIKBAŞ, N. . OMER HALISDEMIR UNIVERSITESI MUHENDISLIK BILIMLERI DERGISI, 2019, 8, 583-592. 200 + 0
10.28948/ngumuh.517203

2017
1. AÇIKBAŞ, G.; GÖÇMEZ, H. . ACADEMIC PLATFORM-JOURNAL OF ENGINEERING AND SCIENCE, 2017, 5, 138-145. 200 + 0
10.21541/apjes.290743

International - Chapter(s) in Book 2500
1. Çalış Açıkbaş, N.; Açıkbaş, G. Theory and Research in Engineering, ISBN: 978-625-7243-79-7, Gece Publishing, Number of print: 1, Total Printing Number: 10000, 392 Page, English, Ankara, Turkey, 2020. 2500
https://www.gecekitapligi.com/haber/haber/eylul-2020-kitaplarimiz-yayinlandi
International - Scientific Book (Excluded Thesis) 2500
1. ÇALIŞ AÇIKBAŞ, N.; AÇIKBAŞ, G. THEORY AND RESEARCH IN ENGINEERING, ISBN: 978-625-7243-79-7, Gece Publishing, Number of print: 1, Total Printing Number: , 34 Page, English, ANKARA, Turkey, 2020. 0
2. ÇALIŞ AÇIKBAŞ, N.; AÇIKBAŞ, G. Mühendislik Alanında Akademik Araştırmalar ve Derlemeler 2, ISBN: 978-625-6634-06-0, PLANATUS, Number of print: 1, Total Printing Number: , 443 Page, Turkish, Ankara, Turkey, 2023. 0
3. AÇIKBAŞ, G.; ÇALIŞ AÇIKBAŞ, N. Mühendislik Alanında Akademik Araştırmalar ve Derlemeler I, ISBN: 978-625-6517-45-5, PLANATUS, Number of print: 1, Total Printing Number: , 565 Page, Turkish, Ankara, Turkey, 2023. 0
4. AÇIKBAŞ, G.; ÇALIŞ AÇIKBAŞ, N. MÜHENDİSLİK ALANINDA TEORİ VE YAKLAŞIMLAR, ISBN: 978-625-7243-56-8, GECE KİTAPLIĞI, Number of print: 1, Total Printing Number: , 18 Page, Turkish, ANKARA, Turkey, 2020. 0
National - Chapter(s) in Book 18250
1. Açıkbaş, G.; Çalış Açıkbaş, N. Mühendislik Alanında Teori ve Araştırmalar, ISBN: 978-625-7243-56-8, Gece Kitaplığı, Number of print: 1, Total Printing Number: 10000, 531 Page, Turkish, Ankara, Turkey, 2020. 3375
https://www.gecekitapligi.com/haber/haber/eylul-2020-kitaplarimiz-yayinlandi
2. Açıkbaş, G. GELECEĞİN DÜNYASINDA BİLİMSEL VE MESLEKİ ÇALIŞMALAR - MÜHENDİSLİK VE DOĞA BİLİMLERİ, ISBN: 978-605-327-988-4, Ekin Basın Yayın Dağıtım, Number of print: 1, Total Printing Number: 10000, 268 Page, Turkish, Bursa, Turkey, 2019. 3250
https://issuu.com/isvosjournal/docs/gdbvem_2019-m_hendislik_ve_do_a
3. Açıkbaş, G.; Çalış Açıkbaş, N. GELECEĞİN DÜNYASINDA BİLİMSEL VE MESLEKİ ÇALIŞMALAR - MÜHENDİSLİK VE DOĞA BİLİMLERİ, ISBN: 978-605-327-988-4, Ekin Basın Yayın Dağıtım, Number of print: 1, Total Printing Number: 10000, 268 Page, Turkish, Bursa, Turkey, 2019. 1625
https://issuu.com/isvosjournal/docs/gdbvem_2019-m_hendislik_ve_do_a
4. Açıkbaş, G. GELECEĞİN DÜNYASINDA BİLİMSEL VE MESLEKİ ÇALIŞMALAR - MÜHENDİSLİK VE TEKNOLOJİ, ISBN: 978-605-327-789-7, Ekin Basın Yayın Dağıtım, Number of print: 1, Total Printing Number: 10000, 300 Page, Turkish, Bursa, Turkey, 2018. 4000
https://openlibrary.org/books/OL26646467M/GELECE%C4%9E%C4%B0N_D%C3%9CNYASINDA_B%C4%B0L%C4%B0MSEL_VE_MESLEK%C4%B0_%C3%87ALI%C5%9EMALAR_-_M%C3%9CHEND%C4%B0SL%C4%B0K_VE_TEKNOLOJ%C4%B0
5. Açıkbaş, G. GELECEĞİN DÜNYASINDA BİLİMSEL VE MESLEKİ ÇALIŞMALAR - MÜHENDİSLİK VE TEKNOLOJİ, ISBN: 978-605-327-789-7, Ekin Basın Yayın Dağıtım, Number of print: 1, Total Printing Number: 10000, 300 Page, Turkish, Bursa, Turkey, 2018. 4000
https://openlibrary.org/books/OL26646467M/GELECE%C4%9E%C4%B0N_D%C3%9CNYASINDA_B%C4%B0L%C4%B0MSEL_VE_MESLEK%C4%B0_%C3%87ALI%C5%9EMALAR_-_M%C3%9CHEND%C4%B0SL%C4%B0K_VE_TEKNOLOJ%C4%B0
6. Çalış Açıkbaş, N.; Açıkbaş, G. GELECEĞİN DÜNYASINDA BİLİMSEL VE MESLEKİ ÇALIŞMALAR - MÜHENDİSLİK VE TEKNOLOJİ, ISBN: 978-605-327-789-7, Ekin Basın Yayın Dağıtım, Number of print: 1, Total Printing Number: 10000, 300 Page, Turkish, Bursa, Turkey, 2018. 2000
https://openlibrary.org/books/OL26646467M/GELECE%C4%9E%C4%B0N_D%C3%9CNYASINDA_B%C4%B0L%C4%B0MSEL_VE_MESLEK%C4%B0_%C3%87ALI%C5%9EMALAR_-_M%C3%9CHEND%C4%B0SL%C4%B0K_VE_TEKNOLOJ%C4%B0
National - Scientific Book (Excluded Thesis) 18250
1. AÇIKBAŞ, G.; ÇALIŞ AÇIKBAŞ, N. Geleceğin Dünyasında Bilimsel ve Mesleki Çalışmalar - Mühendislik ve Doğa Bilimleri ( 1. Basım), ISBN: 978-605-327-988-4, Ekin Yayınevi, Number of print: 1, Total Printing Number: , 268 Page, Turkish, Bursa, Turkey, 2019. 0
2. AÇIKBAŞ, G. GELECEĞİN DÜNYASINDA BİLİMSEL VE MESLEKİ ÇALIŞMALAR - MÜHENDİSLİK VE DOĞA BİLİMLERİ, ISBN: 978-605-327-988-4, Ekin Yayınevi, Number of print: 1, Total Printing Number: , 268 Page, Turkish, Bursa, Turkey, 2019. 0
3. AÇIKBAŞ, G. GELECEĞİN DÜNYASINDA BİLİMSEL VE MESLEKİ ÇALIŞMALAR - MÜHENDİSLİK VE TEKNOLOJİ, ISBN: 978-605-327-789-7, EKİN BASIN YAYIN DAĞITIM, Number of print: 1, Total Printing Number: , 300 Page, Turkish, , Turkey, 2018. 0
4. AÇIKBAŞ, G. GELECEĞİN DÜNYASINDA BİLİMSEL VE MESLEKİ ÇALIŞMALAR - MÜHENDİSLİK VE TEKNOLOJİ, ISBN: 978-605-327-789-7, EKİN BASIN YAYIN DAĞITIM, Number of print: 1, Total Printing Number: , 300 Page, Turkish, , Turkey, 2018. 0
5. ÇALIŞ AÇIKBAŞ, N.; AÇIKBAŞ, G. GELECEĞİN DÜNYASINDA BİLİMSEL VE MESLEKİ ÇALIŞMALAR - MÜHENDİSLİK VE TEKNOLOJİ, ISBN: 978-605-327-789-7, EKİN BASIN YAYIN DAĞITIM, Number of print: 1, Total Printing Number: , 300 Page, Turkish, , Turkey, 2018. 0
International - Full text - Oral 7760

39. AÇIKBAŞ, G.; ÇALIŞ AÇIKBAŞ, N.; Karaer, H., DİOPSİT ESASLI CAM SERAMİK SIR GELİŞİMİNE BORİK ASİT İLAVESİNİN ETKİSİ "EFFECT OF THE BORIC ACID ADDITION ON THE DEVELOPMENT OF DIOPSIDE BASED GLASS CERAMIC". 3. BİLSEL INTERNATIONAL SUMELA SCIENTIFIC RESEARCHES CONGRESS, 2024-04-06, , Trabzon, Turkey, 2024. 200
https://bilselkongreleri.com/

38. Karaer, H.; ÇALIŞ AÇIKBAŞ, N.; AÇIKBAŞ, G., HAVACILIK MALZEMELERİ İÇİN BUZ TUTMAYAN YÜZEYLER, 'ANTI-ICING SURFACES FOR AVIATION MATERIALS'. 3. BİLSEL INTERNATIONAL SUMELA SCIENTIFIC RESEARCHES CONGRESS, 2024-04-06, , Trabzon, Turkey, . 200

37. BERTAN, D.; AÇIKBAŞ, G., CAM ELYAF TAKVİYELİ POLİMER ESASLI KOMPOZİT ÖZELLİKLERİNE NANOKİL İLAVESİNİN ETKİSİ (EFFECT OF NANOCLAY ADDITION ON GLASS FIBER REINFORCED POLYMER BASED COMPOSITE PROPERTIES). 7. ULUSLARARASI MARMARA BİLİMSEL ARAŞTIRMALAR VE İNOVASYON KONGRESİ, 2024-01-27, , İSTANBUL, Turkey, 2024. 200
https://www.isarconference.org/marmara

36. Hindi, H.; AÇIKBAŞ, G., THE EFFECT OF SURFACE MORPHOLOGY AND HYDROPHOB|C COATİNG ON POLYESTER AND COMPOSİTE PROPERTİES. 8th INTERNATIONAL ASIAN CONGRESS ON CONTEMPORARY SCIENCES, 2023-05-05, , Aksaray, Turkey, 2023. 200
https://www.asyakongresi.org/

35. SEZER, K.; AÇIKBAŞ, G.; ÇALIŞ AÇIKBAŞ, N., THE EFFECT OF HYDROPHOBIC COATING APPLIED ON MICA REINFORCED EPOXY MATRIX COMPOSITES ON THE WATER ABSORPTION PROPERTIES OF THE COMPOSITE. Euro Asia 10th. International Congress on Applied Sciences, 2022-08-07, , Ankara, Turkey, . 200

34. Uzabacı, Y.; AÇIKBAŞ, G.; ÇALIŞ AÇIKBAŞ, N., Remineralization agents used in dental fillings.. 3rd Advanced Engineering Days, 2022-06-08, , Mersin, Turkey, . 200

33. Tutkun, B.; AÇIKBAŞ, G.; ÇALIŞ AÇIKBAŞ, N., Controlled drug delivery systems. 3rd Advanced Engineering Days, 2022-06-08, , Mersin, Turkey, . 200

32. Hindi, H.; AÇIKBAŞ, G., Hydrophobic and superhydrophobic material surfaces and properties. 3rd Advanced Engineering Days, 2022-06-08, , Mersin, Turkey, . 200

31. Erdem, B.; AÇIKBAŞ, G.; ÇALIŞ AÇIKBAŞ, N., Dental composites: An overview. 3rd Advanced Engineering Days, 2022-06-08, , Mersin, Turkey, . 200

30. Erdem, B.; Açıkbaş, G.; Çalış Açıkbaş, N., Dental composites: An overview. Advanced Engineering Days, 2022-06-08, 2022-06-09, Mersin, Turkey, 2022. 200
https://aed.mersin.edu.tr/

29. Uzabacı, Y.; Açıkbaş, G.; Çalış Açıkbaş, N., Remineralization agents used in dental fillings. Advanced Engineering Days, 2022-06-08, 2022-06-09, Mersin, Turkey, 2022. 200
https://aed.mersin.edu.tr/

28. Tutkun, B.; Açıkbaş, G.; Çalış Açıkbaş, N., Controlled drug delivery systems. Advanced Engineering Days, 2022-06-08, 2022-06-09, Mersin, Turkey, 2022. 200
https://aed.mersin.edu.tr/

27. Hindi, H.; Açıkbaş, G., Hydrophobic and superhydrophobic material surfaces and properties. Advanced Engineering Days, 2022-06-08, 2022-06-09, Mersin, Turkey, 2022. 200
https://aed.mersin.edu.tr/

26. Açıkbaş, G.; Çalış Açıkbaş, N.; Kayalı, M., NANO ÇİNKO OKSİT MODİFİYELİ PORSELEN KARO SIRLARINDA SIR KALINLIĞININ YÜZEY ÖZELLİKLERİNE ETKİSİ. MAS International European Conference on Mathematıcs-Engineering-Natural&Medical Sciences-XIII, 2020-10-23, 2020-10-25, Faryab, Afghanistan, 2020. 200
https://tr.masjournal.co.uk/conference-books

25. Çalış Açıkbaş, N.; Açıkbaş, G.; Kayalı, M., NANO ÇİNKO OKSİT KATKILI SIRLARDA PROSES KOŞULLARININ PORSELEN KARO YÜZEY ÖZELLİKLERİNE ETKİSİ. MAS International European Conference on Mathematıcs-Engineering-Natural&Medical Sciences-XIII, 2020-10-23, 2020-10-25, Faryab, Afghanistan, 2020. 200
https://tr.masjournal.co.uk/conference-books

24. ÇALIŞ AÇIKBAŞ, N.; AÇIKBAŞ, G.; KAYALI, M., THE EFFECT OF PROCESS CONDITIONS ON PORCELAIN TILE SURFACE PROPERTIES WITH NANO ZINC OXIDE ADDITIVE(NANO ÇİNKO OKSİT KATKILI SIRLARDA PROSES KOŞULLARININ PORSELEN KARO YÜZEY ÖZELLİKLERİNE ETKİSİ). MAS INTERNATIONAL EUROPEAN CONFERENCE ON MATHEMATICS-ENGINEERING-NATURALMEDICAL SCIENCES-XIII, 2020-10-23, 2020-10-24, , Afghanistan, . 200

23. AÇIKBAŞ, G.; ÇALIŞ AÇIKBAŞ, N.; KAYALI, M., THE EFFECT OF GLAZING THICKNESS ON SURFACE CHARACTERISTICS OF NANO ZINC OXIDE MODIFIED PORCELAIN TILES(NANO ÇİNKO OKSİT MODİFİYELİ PORSELEN KARO SIRLARINDA SIR KALINLIĞININ YÜZEY ÖZELLİKLERİNE ETKİSİ). MAS INTERNATIONAL EUROPEAN CONFERENCE ON MATHEMATICS-ENGINEERING-NATURALMEDICAL SCIENCES-XIII, 2020-10-23, 2020-10-24, , Afghanistan, . 200

22. ÇALIŞ AÇIKBAŞ, N.; ATAMAN, A.; AÇIKBAŞ, G., Production of SiAlON-Graphite Composites with Spark Plasma Sintering.. III. International Scientific and Vocational Studies Congress - Engineering, 2019-06-27, 2019-06-30, NEVŞEHİR, Turkey, . 200

21. AÇIKBAŞ, G.; YAMAN ISLAK, B.; OĞUZHAN, C., The Effect of Waste Nut Shell and Pine Cones Amount on Mechanical Properties of Epoxy Matrix Composites. III. International Scientific and Vocational Studies Congress – Engineering, 2019-06-27, 2019-06-30, NEVŞEHİR, Turkey, . 200

20. Çalış Açıkbaş, N.; Ataman, A.; Açıkbaş, G., Spark Plazma Sinterleme ile Sialon-Grafit Kompozitlerinin Üretimi. III. International Scientific and Vocational Studies Congress – Engineering, 2019-06-27, 2019-06-30, Nevşehir, Turkey, 2019. 200
http://www.bilmescongress.com/

19. AÇIKBAŞ, G.; ÇALIŞ AÇIKBAŞ, N., Investigation of Hydrophobic Coating Properties Used on the Surface of Ceramic Interior Wall Tiles. III. International Scientific and Vocational Studies Congress – Engineering, 2019-06-27, 2019-06-30, NEVŞEHİR, Turkey, . 200

18. Açıkbaş, G.; Can, O.; Yaman, B., Epoksi Matrisli Kompozitlerin Mekanik Özelliklerine Atık Fındık Kabuğu ve Çam Kozalağı Miktarının Etkisi. III. International Scientific and Vocational Studies Congress – Engineering, 2019-06-27, 2019-06-30, Nevşehir, Turkey, 2019. 200
http://www.bilmescongress.com/

17. Açıkbaş, G.; Çalış Açıkbaş, N., Seramik İç Cephe Kaplamalarının Yüzeylerinde Kullanılan Hidrofobik Kaplama Malzeme Özelliklerinin İncelenmesi. III. International Scientific and Vocational Studies Congress – Engineering, 2019-06-27, 2019-06-30, Nevşehir, Turkey, 2019. 200
http://www.bilmescongress.com/://

16. Kayalı, M.; Açıkbaş, G.; Çalış Açıkbaş, N., Hidrofobik Kaplı Porselen Karo Yüzey Özelliklerinin İncelenmesi. The International Conference on Materials Science, Mechanical and Automotive Engineerings and Technology, 2019-06-21, 2019-06-23, Nevşehir, Turkey, 2019. 200
http://2019.imsmatec.org/

15. Kayalı, M.; AÇIKBAŞ, G.; ÇALIŞ AÇIKBAŞ, N., INVESTIGATION OF HYDROPHOBIC COATED PORCELAIN TILE SURFACE PROPERTIES. The International Conference on Materials Science, Mechanical and Automotive Engineerings and Technology, 2019-06-21, 2019-06-23, NEVŞEHİR, , . 200

14. Açıkbaş, G., Porselen Atık ve Ca(OH)2 İlavesinin Polimer Matrisli Seramik Takviyeli Kompozit Özelliklerine Etkisi. II. International Scientific and Vocational Studies Congress, 2018-07-05, 2018-07-08, Nevşehir, Turkey, 2018. 200
https://www.bilmescongress.com/en/invitation/

13. AÇIKBAŞ, G., Porselen Atık ve Ca(OH)2 İlavesinin Polimer Matrisli Seramik Takviyeli Kompozit Özelliklerine Etkisi. II.Uluslatarası Bilimsel ve Mesleki Çalışmalar Kongresi, 2018-07-05, 2018-07-08, , , . 200

12. Çalış Açıkbaş, N.; Açıkbaş, G., SiALON Üretim Prosesinin Tekrar EDilebilirlik Analizlerinin İstatiksel Değerlendirilmesi. 3.International Symposium on Environment and Morality, 2016-11-04, 2016-11-06, Antalya, Turkey, 2016. 200
http://www.i-sem.info/PastConferences/ISEM2016/

11. Açıkbaş, G.; Göçmez, H., Polyester Matrisli Kompozit Özeliklerine Vitrifiye Seramik Sağlık Gereci Atık Miktarının Etkisi. 3.International Symposium on Environment and Morality, 2016-11-04, 2016-11-06, Antalya, Turkey, 2016. 200
http://www.i-sem.info/PastConferences/ISEM2016/

10. ÇALIŞ AÇIKBAŞ, N.; AÇIKBAŞ, G., Statistical Evaluation of Repeatability Analyses of Sialon Production Process.(SiAlON Üretim Prosesinin Tekrar Edilebilirlik Analizlerinin İstatiksel Değerlendirilmesi). 3.International Symposium on Environment And Morality, 2016-10-04, 2016-10-06, Antalya, Turkey, . 200

9. AÇIKBAŞ, G.; GÖÇMEZ, H., Effect of Vitreous China Sanitaryware Waste Amount on Polyester Matrix Composite Properties. 3.International Symposium on Environment And Morality, 2016-10-04, 2016-10-06, Antalya, Turkey, . 200

8. Gokdai, D.; Akpınar Borozan, A.; Açıkbaş, G., Effect of marble pine cone waste ratios on mechanical properties of polyester matrix composites. 14.International Conference on Environmental Science and Technology, 2015-09-03, 2015-09-05, Rodos, Greece, 2015. 200
https://cest2015.gnest.org/

7. AÇIKBAŞ, G.; ÇALIŞ AÇIKBAŞ, N., Epoxy matrix composites containing urea formaldehyde waste particulate filler. 14.International Conference on Environmental Science and Technology(CEST2015), 2015-09-03, 2015-09-05, RODOS, Greece, . 200

6. Açıkbaş, G.; Çalış Açıkbaş, N., Epoxy matrix composites containing urea formaldehyde waste particulate filler. 14.International Conference on Environmental Science and Technology, 2015-09-03, 2015-09-05, Rodos, Greece, 2015. 200
https://cest2015.gnest.org/

5. GÖKDAİ, D.; AKPINAR BORAZAN, A.; AÇIKBAŞ, G., Effect of marble pine cone waste ratios on mechanical properties of polyester matrix composites. 14.International Conference on Environmental Science and Technology(CEST2015), 2015-09-03, 2015-09-05, RODOS, Greece, . 200

4. Açıkbaş, G.; Özcan, S.; Çalış Açıkbaş, N., Formation of Superhydrophobic Character on Ceramic Surfaces. 2nd International Symposium on Innovative Technologies in Engineering and Science, 2014-06-18, 2014-06-20, Karabük, Turkey, 2014. 200
https://isites.info/PastConferences/ISITES2014/

3. Açıkbaş, G.; Çalış Açıkbaş, N.; İkizek, E.; Özel, M.; Eker, A., Characterization of Green Epoxy Matrix Composites Filled with Ceramic Wastes. 2nd International Symposium on Innovative Technologies in Engineering and Science, 2014-06-18, 2014-06-20, Karabük, Turkey, 2014. 180
https://isites.info/PastConferences/ISITES2014/p://

2. AÇIKBAŞ, G.; ÖZCAN, S.; ÇALIŞ AÇIKBAŞ, N., Formation of Superhydrophobic Character on Ceramic Surfaces A16 ISITES2014ID98. 2nd International Symposium on Innovative Technologies in Engineering and Science, 2014-06-18, 2014-06-20, KARABÜK, Turkey, . 200

1. AÇIKBAŞ, G.; ÇALIŞ AÇIKBAŞ, N.; İkizek, E.; Özel, M.; Eker, A., Characterization of Green Epoxy Matrix Composites Filled with Ceramic Wastes A16 ISITES2014ID96. 2nd International Symposium on Innovative Technologies in Engineering and Science, 2014-06-18, 2014-06-20, KARABÜK, Turkey, . 180

International - Full text - Poster 200

2. Andoğlu, E.; Akpınar Borozan, A.; Açıkbaş, G., Effect of marble hop waste ratios on mechanical properties of polyester matrix composites. 14.International Conference on Environmental Science and Technology, 2015-09-03, 2015-09-05, Rodos, Greece, 2015. 100
https://cest2015.gnest.org/

1. ANDOĞLU, E.; AKPINAR BORAZAN, A.; AÇIKBAŞ, G., Effect of marble hop waste ratios on mechanical properties of polyester matrix composites. 14.International Conference on Environmental Science and Technology, 2015-09-03, 2015-09-05, RODOS, Greece, . 100

International - Abstract - Oral 3385

37. TOKLU, Y.; ÇALIŞ AÇIKBAŞ, N.; AÇIKBAŞ, G.; ÇERÇEVİK, A.; AKPINAR, P., Turkish Lunar Soil Simulant TBG-1. 18th Biennial International Conference ASCE Earth and Space 2022, 2022-04-25, , DENVER, United States of America, . 70

36. Çalış Açıkbaş, N.; Yaman, B.; Açıkbaş, G.; Özcan, S., Hibrit Kompozitlerin Kayma Aşınması Karakteristikleri Üzerine Bir Çalışma: Duvar Karosu: Cam Fiber Atık Oranının Etkisi. II. International Scientific and Vocational Studies Congress, 2018-09-05, 2018-09-08, Nevşehir, Turkey, 2018. 75
https://www.bilmescongress.com/en/invitation/

35. ÇALIŞ AÇIKBAŞ, N.; YAMAN, B.; AÇIKBAŞ, G.; ÖZCAN, S., HİBRİT KOMPOZİTLERİN KAYMA AŞINMASI KARAKTERİSTİKLERİ ÜZERİNE BİR ÇALIŞMA: DUVAR KAROSU: CAM FİBER ATIK ORANININ ETKİSİ. II. International Scientific and Vocational Studies Congress, 2018-07-05, 2018-07-08, , Turkey, . 75

34. AÇIKBAŞ, G.; GÖÇMEZ, H., Investigation of Usage of Waste Fine Fire Clay Ceramic Sanitaryware Products in Polymer Matrix Composite Production. Ist International Symposium on Innovative Approaches in Scientific Studies(ISAS-2018), 2018-04-11, 2018-04-13, Antalya, Turkey, . 100

33. ÖZCAN, S.; AÇIKBAŞ, G., Production of a Polymer Matrix Composite Material with Antibacterial Property. Ist International Symposium on Innovative Approaches in Scientific Studies(ISAS-2018), 2018-04-11, 2018-04-13, Antalya, Turkey, . 100

32. AÇIKBAŞ, G., Investigation of Antibacterial Activity and Physico-Mechanical Properties of Boron and Porcelain Incorporated Polymer Matrix Composite Applications. Ist International Symposium on Innovative Approaches in Scientific Studies(ISAS-2018), 2018-04-11, 2018-04-13, Antalya, , . 100

31. ÇALIŞ AÇIKBAŞ, N.; SOYLU, Ş.; Kırcalı, Ş.; AÇIKBAŞ, G.; ÖZCAN, S., Properties of porous silicon nitride bonded-silicon carbide ceramics for diesel particle filter. Ist International Symposium on Innovative Approaches in Scientific Studies(ISAS-2018), 2018-04-11, 2018-04-13, Antalya, Turkey, . 60

30. Çalış Açıkbaş, N.; Soylu, Ş.; Kırcalı, Ş.; Açıkbaş, G.; Özcan, S., Properties of porous silicon nitride bonded-silicon carbide ceramics for diesel particle fitler. International Symposium on Innovative Approaches in Scientific Studies, 2018-04-11, 2018-04-13, Antalya, Turkey, 2018. 60
http://www.isassymposium.org/

29. Çalış Açıkbaş, N.; Açıkbaş, G.; Yaman, B.; Özcan, S., The Influence of Wall Tile and Glass Fiber Waste Particle Sizes on the Wear Behavior of Hybrid Epoxy Matrix Composites. Ist International Symposium on Innovative Approaches in Scientific Studies, 2018-04-11, 2018-04-13, Antalya, Turkey, 2018. 85
http://www.isassymposium.org/

28. Açıkbaş, G., Bor ve porselen Takviyeli POlimer Matrisli Kompozit Uygulamalarında Antibakteriyel Aktivitenin ve Fiziko-Mekanik Özelliklerin Araştırılması. Ist International Symposium on Innovative Approaches in Scientific Studies, 2018-04-11, 2018-04-13, Antalya, Turkey, 2018. 100
http://www.isassymposium.org/

27. Açıkbaş, G.; Göçmez, H., Atık Seramik Sağlık Gereci FFC ürünlerinin Polimer Matrisli Kompozit Ürün Üretiminde Kullanımının Araştırılması. Ist International Symposium on Innovative Approaches in Scientific Studies, 2018-04-11, 2018-04-13, Antalya, Turkey, 2018. 100
http://www.isassymposium.org/

26. Özcan, S.; Açıkbaş, G., Production of a Polymer Matrix Composite Material with Antibacterial Property. Ist International Symposium on Innovative Approaches in Scientific Studies, 2018-04-11, 2018-04-13, Antalya, Turkey, 2018. 100
http://www.isassymposium.org/

25. ÇALIŞ AÇIKBAŞ, N.; AÇIKBAŞ, G.; YAMAN, B.; ÖZCAN, S., The Influence of Wall Tile and Glass Fiber Waste Particle Sizes on the Wear Behavior of Hybrid Epoxy Matrix Composites. Ist International Symposium on Innovative Approaches in Scientific Studies(ISAS-2018), 2018-04-11, 2018-04-13, Antalya, Turkey, . 85

24. KARADAĞ, M.; AÇIKBAŞ, G.; ÇİLLİYÜZ, Y.; ÇALIŞ AÇIKBAŞ, N., TOZ METALÜRJİSİ YÖNTEMİYLE ÜRETİLEN BAKIR-BOR KARBÜR KOMPOZİT ÖZELLİKLERİNE TAKVİYE MİKTARININ ETKİSİ. Uluslararası Mühendislik Araştırma Sempozyumu (UMAS-2017), 2017-09-11, 2017-09-13, Düzce, Turkey, . 85

23. KARADAĞ, M.; AÇIKBAŞ, G.; ÇİLLİYÜZ, Y.; ÇALIŞ AÇIKBAŞ, N., BAKIR MATRİSLİ KOMPOZİT ÖZELLİKLERİ ÜZERİNE TiC TAKVİYE MİKTARININ ETKİSİ. Uluslararası Mühendislik Araştırma Sempozyumu (UMAS-2017), 2017-09-11, 2017-09-13, , Turkey, . 85

22. Karadağ, M.; Açıkbaş, G.; Çilliyüz, Y.; Çalış Açıkbaş, N., Bakır Matrisli Kompozit Özellikleri Üzerine TiC Takviye Miktarının Etkisi. Uluslararası Mühendislik Araştırma Sempozyumu, 2017-09-11, 2017-09-13, Düzce, Turkey, 2018. 85
https://duzce.edu.tr/759-etkinlik-uluslararasi-muhendislik-arastirmalari-sempozyumu

21. Karadağ, M.; Açıkbaş, G.; Çilliyüz, Y.; Çalış Açıkbaş, N., Toz Metalürjisi Yöntemiyle Üretilen Bakır-Bor Karbür Kompozit Özelliklerine Takviye Miktarının Etkisi. Uluslararası Mühendislik Araştırma Sempozyumu, 2017-09-11, 2017-09-13, Düzce, Turkey, 2017. 85
https://duzce.edu.tr/759-etkinlik-uluslararasi-muhendislik-arastirmalari-sempozyumu

20. ÇALIŞ AÇIKBAŞ, N.; AÇIKBAŞ, G.; YAMAN, B.; SOYLU, Ş., TALAŞLI İMALATTA KULLANILAN SiAlON ESASLI KESİCİ UÇLARIN MİKROYAPI TASARIMI. 2. ULUSLARARASI MÜHENDİSLİK MİMARLIK VE TASARIM KONGRESİ, 2017-05-12, 2017-05-13, , , . 85

19. Çalış Açıkbaş, N.; Açıkbaş, G.; Yaman, B.; Soylu, Ş., Talaşlı İmalatta Kullanılan Sialon Esaslı Kesici Uçların Mikroyapı Tasarımı. 2ND International Congress on Engineering Architecture and Design, 2017-05-12, 2017-05-13, Kocaeli, Turkey, 2017. 85
http://www.muhendislikmimarliktasarimkongresi.org/eng/

18. Açıkbaş, G.; Göçmez, H., Polimer Matrisli Kompozit Malzemelerin Mekanik Ve Fiziksel Özelliklerine Dolgu Fazı Miktarının ve Proses Koşullarının Etkisi. 2ND International Congress on Engineering Architecture and Design, 2017-05-12, 2017-05-13, Kocaeli, Turkey, 2017. 100
http://www.muhendislikmimarliktasarimkongresi.org/eng/

17. Açıkbaş, G.; Çalış Açıkbaş, N.; Yaman, B.; Soylu, Ş., Katalizör Miktarının Polimer Matrisli Kompozit Malzeme Özellikleri Üzerine Etkisi. 2ND International Congress on Engineering Architecture and Design, 2017-05-12, 2017-05-13, Kocaeli, Turkey, 2017. 95
http://www.muhendislikmimarliktasarimkongresi.org/eng/

16. AÇIKBAŞ, G.; ÇALIŞ AÇIKBAŞ, N.; YAMAN, B.; SOYLU, Ş., KATALİZÖR MİKTARININ POLİMER MATRİSLİ KOMPOZİT MALZEME ÖZELLİKLERİ ÜZERİNE ETKİSİ. 2. ULUSLARARASI MÜHENDİSLİK MİMARLIK VE TASARIM KONGRESİ, 2017-05-12, 2017-05-13, , , . 95

15. AÇIKBAŞ, G.; GÖÇMEZ, H., POLİMER MATRİSLİ KOMPOZİT MALZEMELERİN MEKANİK VE FİZİKSEL ÖZELLİKLERİNE DOLGU FAZI MİKTARININ VE PROSES KOŞULLARININ ETKİSİ. 2. ULUSLARARASI MÜHENDİSLİK MİMARLIK VE TASARIM KONGRESİ, 2017-05-12, 2017-05-13, , , . 100

14. Yaman, B.; Açıkbaş, G.; Çalış Açıkbaş, N., Effect Of Particle Size Variations On The Tribological Properties Of Porcelain Waste Added Epoxy Composites. International Conference on Chemical and Materials Engineering, 2017-05-04, 2017-05-05, Roma, Italy, 2017. 100
https://waset.org/

13. YAMAN, B.; AÇIKBAŞ, G.; ÇALIŞ AÇIKBAŞ, N., Effect Of Particle Size Variations On The Tribological Properties Of Porcelain Waste Added Epoxy Composites. International Conference on Chemical and Materials Engineering, 2017-05-04, 2017-05-05, , , . 100

12. Çalış Açıkbaş, N.; Yaman, B.; Açıkbaş, G., Effect of Process Parameters on the Tribological Properties of Porcalein Waste Reinforced Epoxy Composites. International Conference on Materials Science Engineering, 2017-03-08, 2017-03-11, Braşov, Romania, 2017. 100
http://www.bramat.ro/bramat-2017.html

11. Açıkbaş, G.; Özcan, S.; Çalış Açıkbaş, N., Effect of Walnut Shell Reinforcement on Polymer Matrix Composites. International Conference on Materials Science Engineering, 2017-03-08, 2017-03-11, Braşov, Romania, 2017. 100
http://www.bramat.ro/bramat-2017.html

10. ÖZCAN, S.; AÇIKBAŞ, G.; ÇALIŞ AÇIKBAŞ, N., Induced Superhidrophobic An Antimicrobial Character Of Zinc Metal Modified Ceramic Wall Tile Surfaces. Internatıonal Conference On Materıals Scıence Engıneerıng, 2017-03-08, 2017-03-11, , , . 100

9. AÇIKBAŞ, G.; ÖZCAN, S.; ÇALIŞ AÇIKBAŞ, N., Effect Of Walnut Shell Reinforcement On Polymer Matrix Composites,. Internatıonal Conference On Materıals Scıence Engıneerıng, 2017-03-08, 2017-03-11, , , . 100

8. ÇALIŞ AÇIKBAŞ, N.; YAMAN, B.; AÇIKBAŞ, G., Effect Of Process Parameters On The Tribological Properties Of Porcalein Waste Reinforced Epoxy Composites. Internatıonal Conference On Materıals Scıence Engıneerıng, 2017-03-08, 2017-03-11, , , . 100

7. Özcan, S.; Açıkbaş, G.; Çalış Açıkbaş, N., Induced Superhidrophobic an Antimicrobial Character of Zinc Metal Modified Ceramic Wall Tile Surfaces. International Conference on Materials Science Engineering, 2017-03-08, 2017-03-11, Braşov, Romania, 2017. 100
http://www.bramat.ro/bramat-2017.html

6. GÖKDAİ, D.; AKPINAR BORAZAN, A.; AÇIKBAŞ, G., Effect of Chestnut and Glass Powder on some Physical and Mechanical Properties of Polyester Composites. 1st International Black Sea Congress on Environmental Sciences, 2016-08-31, 2016-09-03, , , . 100

5. AKPINAR BORAZAN, A.; GÖKDAİ, D.; AÇIKBAŞ, G.; Çatır, H., Polyester Composite Material Production Using Waste of Pet Water Bottles and Pine. 1st International Black Sea Congress on Environmental Sciences,, 2016-08-31, 2016-09-03, , , . 75

4. Akpınar Borozan, A.; Gökdai, D.; Açıkbaş, G., Polyester Composite Material Production Using Waste of Pet Water Bottles and Pine. 1st International Black Sea Congress on Environmental Science, 2016-08-31, 2016-09-03, Giresun, Turkey, 2016. 100
https://www.bilimsenligi.com/1st-international-black-sea-congress-on-environmental-sciences.html/

3. ÇALIŞ AÇIKBAŞ, N.; AÇIKBAŞ, G., Production and Characterization of Economical Hybrid Polymer Matrix Composites. 1st International Black Sea Congress on Environmental Sciences, 2016-08-31, 2016-09-03, , , . 100

2. Gokdai, D.; Akpınar Borozan, A.; Açıkbaş, G., Effect of Chestnut and Glass Powder on some Physical and Mechanical Properties of Polyester Composites. 1stInternational Black Sea Congress on Environmental Science, 2016-08-31, 2016-09-03, Giresun, Turkey, 2016. 100
https://www.bilimsenligi.com/1st-international-black-sea-congress-on-environmental-sciences.html/

1. Çalış Açıkbaş, N.; Açıkbaş, G., Production and Characterization of Economical Hybrid Polymer Matrix Composites. 1stInternational Black Sea Congress on Environmental Science, 2016-08-31, 2016-09-03, Giresun, Turkey, 2016. 100
https://www.bilimsenligi.com/1st-international-black-sea-congress-on-environmental-sciences.html/

International - Abstract - Poster 1435

30. KAYALI, M.; AÇIKBAŞ, G.; TURKOL, A.; ÇALIŞ AÇIKBAŞ, N., EASY CLEAN SURFACE COATING AND ITS IMPORTANCE ON PORCELAIN TILE PRODUCTS. The International Conference on Materials Science, Mechanical and Automotive Engineerings and Technology, 2019-06-21, 2019-06-23, NEVŞEHİR, Turkey, . 42

29. Kayalı, M.; Açıkbaş, G.; Türkol, A.; Çalış Açıkbaş, N., Easy Clean Surface Coatıng and Its Importance On Porcelaın Tile Products. The International Conference on Materials Science, Mechanical and Automotive Engineerings and Technology, 2019-06-21, 2019-06-23, Nevşehir, Turkey, 2019. 42
http://2019.imsmatec.org/

28. Çalış Açıkbaş, N.; Açıkbaş, G., Industrial applications of high technology ceramics in wear. Ist International Symposium on Innovative Approaches in Scientific Studies, 2018-04-11, 2018-04-13, Antalya, Turkey, 2018. 50
http://www.isassymposium.org/

27. Açıkbaş, G.; Özcan, S., Environmental and Sustainable Biocomposite Materials Applications and Properties. Ist International Symposium on Innovative Approaches in Scientific Studies, 2018-04-11, 2018-04-13, Antalya, Turkey, 2018. 50
http://www.isassymposium.org/

26. Özcan, S.; Açıkbaş, G.; Çalış Açıkbaş, N., Superhyrophobic Surface, Theory, Applications and Technological Importance. Ist International Symposium on Innovative Approaches in Scientific Studies, 2018-04-11, 2018-04-13, Antalya, Turkey, 2018. 50
http://www.isassymposium.org/

25. Çalış Açıkbaş, N.; Açıkbaş, G.; Özcan, S.; Soylu, Ş., İçten Yanmalı Motorlar için Partikül Filtreleri. Ist International Symposium on Innovative Approaches in Scientific Studies, 2018-04-11, 2018-04-13, Antalya, Turkey, 2018. 42
http://www.isassymposium.org/

24. AÇIKBAŞ, G.; ÖZCAN, S., Environmental and Sustainable Biocomposite Materials Applications and Properties. Ist International Symposium on Innovative Approaches in Scientific Studies(ISAS-2018), 2018-04-11, 2018-04-13, Antalya, Turkey, . 50

23. ÇALIŞ AÇIKBAŞ, N.; AÇIKBAŞ, G., Industrial applications of high technology ceramics in wear. Ist International Symposium on Innovative Approaches in Scientific Studies(ISAS-2018), 2018-04-11, 2018-04-13, Antalya, Turkey, . 50

22. ÖZCAN, S.; AÇIKBAŞ, G.; ÇALIŞ AÇIKBAŞ, N., Superhyrophobic Surface, Theory, Applications and Technological Importance. Ist International Symposium on Innovative Approaches in Scientific Studies(ISAS-2018), 2018-04-11, 2018-04-13, Antalya, Turkey, . 50

21. ÇALIŞ AÇIKBAŞ, N.; AÇIKBAŞ, G.; ÖZCAN, S.; SOYLU, Ş., İçten Yanmalı Motorlar için Partikül Filtreleri. I. Uluslararası Bilimsel Çalışmalarda Yenilikçi Yaklaşımlar Sempozyumu(ISAS-2018), 2018-04-11, 2018-04-13, Antalya, Turkey, . 42

20. AÇIKBAŞ, G.; KARADAĞ, M.; ÇİLLİYÜZ, Y.; ÇALIŞ AÇIKBAŞ, N.; ÖZCAN, S., TOZ METALÜRJİSİ YÖNTEMİYLE BAKIR MATRİSLİ SİLİSYUM KARBÜR TAKVİYELİ ALÇAK GERİLİM ELEKTRİK ÜRÜNLERİNE YÖNELİK KONTAK MALZEMESİ ÜRETİMİ VE KARAKTERİZASYONU. II.Uluslararası Akademik Araştırmalar Kongresi(INES2017), 2017-10-18, 2017-10-21, , Turkey, . 45

19. Açıkbaş, G.; Soylu, M., Kompozit Diş Dolgu Malzemeleri ve Özellikleri. II.International Academic Research Congress, 2017-10-18, 2017-10-21, Antalya, Turkey, 2017. 50
https://2017.inescongress.com/books.html

18. Çalış Açıkbaş, N.; Açıkbaş, G., The Effect of Surface Roughness on Tribological Behavior of SiAlON-TiN Composites. II.International Academic Research Congress, 2017-10-18, 2017-10-21, Antalya, Turkey, 2017. 50
https://2017.inescongress.com/books.html

17. ÖZCAN, S.; ÇALIŞ AÇIKBAŞ, N.; AÇIKBAŞ, G., The Investigation of the Effects of Various Low Temperature Processing Materials on the Ceramic Wall Tile Surface Morphology. II.Uluslararası Akademik Araştırmalar Kongresi(INES2017), 2017-10-18, 2017-10-21, , , . 50

16. ÇALIŞ AÇIKBAŞ, N.; AÇIKBAŞ, G., The Effect of Surface Roughness on Tribological Behavior of SiAlON-TiN Composites. II.Uluslararası Akademik Araştırmalar Kongresi(INES2017), 2017-10-18, 2017-10-21, , , . 50

15. Özcan, S.; Çalış Açıkbaş, N.; Açıkbaş, G., The Investigation of the Effects of Various Low Temperature Processing Materials on the Ceramic Wall Tile Surface Morphology. II.International Academic Research Congress, 2017-10-18, 2017-10-21, Antalya, Turkey, 2017. 50
https://2017.inescongress.com/books.html

14. AÇIKBAŞ, G.; Soylu, M., KOMPOZİT DİŞ DOLGU MALZEMELERİ VE ÖZELLİKLERİ. II.Uluslararası Akademik Araştırmalar Kongresi(INES2017), 2017-10-18, 2017-10-21, , , . 50

13. Açıkbaş, G.; Karadağ, M.; Çalış Açıkbaş, N.; Özcan, S.; Çilliyüz, Y., Toz Metalürjisi Yöntemiyle Bakır Matrisli Silisyum Karbür Takviyeli Alçak Gerilim Elektrik Ürünlerine Yönelik Kontak Malzemesi Üretimi Ve Karakterizasyonu. II.International Academic Research Congress, 2017-10-18, 2017-10-21, Antalya, Turkey, 2017. 45
https://2017.inescongress.com/books.html

12. Açıkbaş, G.; Göçmez, H., Effect of Glass Fiber Waste Content on Polyester Matrix Composites. 1st International Black Sea Congress on Environmental Science, 2016-08-31, 2016-09-03, Giresun, Turkey, 2016. 50
https://www.bilimsenligi.com/1st-international-black-sea-congress-on-environmental-sciences.html/

11. AKPINAR BORAZAN, A.; AÇIKBAŞ, G.; GÖKDAİ, D., Effect of Chemical Treatment on Polyester Matrix Composites Reinforced with Chestnut Waste. 1st International Black Sea Congress on Environmental Sciences, 2016-08-31, 2016-09-03, , , . 50

10. AKPINAR BORAZAN, A.; AÇIKBAŞ, G.; GÖKDAİ, D.; yılmaz, s., Comparison of Pine Cone Powder Mica Content on the Mechanical Properties of Polyester Composites. 1st International Black Sea Congress on Environmental Sciences, 2016-08-31, 2016-09-03, , , . 42

9. Akpınar Borozan, A.; Açıkbaş, G.; Gökdai, D., Effect of Chemical Treatment on Polyester Matrix Composites Reinforced with Chestnut Waste. 1st International Black Sea Congress on Environmental Science, 2016-08-31, 2016-09-03, Giresun, Turkey, 2016. 50
https://www.bilimsenligi.com/1st-international-black-sea-congress-on-environmental-sciences.html/

8. Akpınar Borozan, A.; Açıkbaş, G.; Gökdai, D.; Yılmaz, S., Comparison of Pine Cone Powder Mica Content on the Mechanical Properties of Polyester Composites. 1st International Black Sea Congress on Environmental Science, 2016-08-31, 2016-09-03, Giresun, Turkey, 2016. 42
https://www.bilimsenligi.com/1st-international-black-sea-congress-on-environmental-sciences.html/

7. AÇIKBAŞ, G.; GÖÇMEZ, H., Effect of Glass Fiber Waste Content on Polyester Matrix Composites. 1st International Black Sea Congress on Environmental Sciences, 2016-08-31, 2016-09-03, , , . 50

6. AÇIKBAŞ, G.; GÖÇMEZ, H., Polyester Matrix Composites Containing Marble Waste. International Porous and Powder Materials Symposium and Exhibition, 2015-09-15, 2015-09-18, İZMİR, Turkey, . 50

5. Açıkbaş, G.; Göçmez, H., Polyester Matrix Composites Containing Marble Waste. International Porous and Powder Materials Symposium and Exhibition, 2015-09-15, 2015-09-18, İzmir, Turkey, 2015. 50
http://www.ppm2019.org/

4. AÇIKBAŞ, G.; ÇALIŞ AÇIKBAŞ, N.; Keskin, A.; Ari, O.; Dilek, U., Effect of Graphite Filler Loading Concentration on Physical and Mechanical Properties of Epoxy Matris Composites Özet Bildiri. III. INTERNATIONAL CERAMIC GLASS PORCELAIN ENAMEL GLAZE AND PIGMENT CONGRESS, 2014-10-15, 2014-10-17, ESKİŞEHİR, Turkey, . 45

3. Açıkbaş, G.; Çalış Açıkbaş, N.; Keskin, A.; Arı, O.; Uçer, D., Effect of Graphite Filler Loading Concentration on Physical and Mechanical Properties of Epoxy Matris Composites. III.International Ceramic Glass Porcelain Enamel Glaze and Pigment Congress, 2014-10-15, 2014-10-17, Eskişehir, Turkey, 2014. 45
http://turkser.org.tr/seres14/bildiri_ozetleri_n.php

2. AÇIKBAŞ, G.; ÇALIŞ AÇIKBAŞ, N.; ÖZBAY, N., Applying different characterization tools to Si3N4 powders. International Symposium on Nitrides-(ISNT 2012), 2012-06-03, 2012-06-06, , , . 50

1. Açıkbaş, G.; Çalış Açıkbaş, N.; Özbay, N., Applying different characterization tools to Si3N4 powders. International Symposium on Nitrides, 2012-06-03, 2012-06-06, Saint Malo, France, 2012. 50
https://isnt2021.sciencesconf.org/

National - Full text - Oral 275

3. Çetin, İ.; BAŞGÖZ, Ö.; AÇIKBAŞ, G.; ÇALIŞ AÇIKBAŞ, N., Evaluation of Silicon Nitride Reinforced Silica Aerogel Composites for Radom Application. 4th Advanced Engineering Days, 2022-09-21, , Mersin, , . 75

2. Açıkbaş, G.; Kara, F.; Suvacı, E., Sır Yüzeyinde Uçucu Organik İlavelerle Morfoloji Eldesi. Uluslararası Katılımlı VII. Seramik Kongresi, 2008-11-26, 2008-11-28, Afyon, Turkey, 2008. 100
https://www.turkseramik.com/index.php?topic=1512.0

1. AÇIKBAŞ, G.; SUVACI, E.; KARA, F., Sır Yüzeyinde Uçucu Organik İlavelerle Morfoloji Eldesi - Modification of surface morphology of glaze by fugitive additives. Uluslararası Katılımlı VII. Seramik Kongresi, 2008-11-26, 2008-11-28, AFYON, Turkey, . 100

National - Abstract - Oral 100

2. Geçkin, S.; Açıkbaş, G.; Akpınar Borozan, A., Farklı oranlarda çam kozlağı takviyesinin polimer matrisli kompozitlerin mekanik özelliklerine etkisi. 5.Ulusal Kimya Öğrenci Kongresi, 2014-05-17, 2014-05-19, İstanbul, Turkey, 2014. 50
https://ttm.istanbul.edu.tr/tr/duyuru/5-ulusal-kimya-ogrenci-kongresi-calismalari-suruyor-6C006C00470065003600410051005A006300580041003100

1. SİBEL, G.; AÇIKBAŞ, G.; AKPINAR BORAZAN, A., Farklı oranlarda çam kozlağı takviyesinin polimer matrisli kompozitlerin mekanik özelliklerine etkisi. 5.Ulusal Kimya Öğrenci Kongresi, 2014-05-17, 2014-05-19, Bilecik, Turkey, . 50

National - Abstract - Poster 180

8. AÇIKGÖZ, Ç.; ÇALIŞ AÇIKBAŞ, N.; AÇIKBAŞ, G., GRAFİT TAKVİYELİ EPOKSİ MATRİSLİ KOMPOZİTLERİN KARAKTERİZASYONU. 12. Ulusal Kimya Mühendisliği Kongresi, 2016-08-23, 2016-08-26, , Turkey, . 25

7. Açıkgöz, Ç.; Çalış Açıkbaş, N.; Açıkbaş, G., Grafit Takviyeli Epoksi Matrisli Kompozitlerin Karakterizasyonu. 12. Ulusal Kimya Mühendisliği Kongresi, 2016-08-23, 2016-08-26, İzmir, Turkey, 2016. 25
http://www.kmo.org.tr/etkinlikler/ukmk/

6. ÖZCAN, S.; ÇALIŞ AÇIKBAŞ, N.; AÇIKBAŞ, G., Development of Antimicrobial Effect on Ceramic Surfaces. 9.Uluslararası Katılımlı Seramik Kongresi, 2015-11-26, 2015-11-28, , Turkey, . 25

5. Özcan, S.; Çalış Açıkbaş, N.; Açıkbaş, G., Development of Antimicrobial Effect on Ceramic Surfaces. 9.Uluslararası Katılımlı Seramik Kongresi, 2015-11-26, 2015-11-28, Afyon, Turkey, 2015. 25
http://turkser.org.tr/serkon2019/wp-content/uploads/2019/03/IX-SERAMIK-KONGRE-2015.pdf

4. Pehlivan, T.; Akbulut, K.; Furat, Ç.; AÇIKBAŞ, G.; AÇIKGÖZ, Ç., Mermer Atıkları Ve Çinko Oksit Külçe Pirinç Üretim Tesisi Cürufunun Polyester Matriksli Kompozit Malzemelerin Özelliklerine Etkisi. II. Ulusal Kimya Mühendisliği Öğrenci Kongresi (UKMÖK2), 2013-05-04, 2013-05-06, , Turkey, . 15

3. Pehlivan, T.; Akbulut, K.; Furat, Ç.; Açıkbaş, G.; Açıkgöz, Ç., Mermer Atıkları Ve Çinko Oksit Külçe Pirinç Üretim Tesisi Cürufunun Polyester Matriksli Kompozit Malzemelerin Özelliklerine Etkisi. II. Ulusal Kimya Mühendisliği Öğrenci Kongresi, 2013-05-04, 2013-05-06, Ankara, Turkey, 2013. 15
http://www.ukmok2.ankara.edu.tr/

2. AÇIKBAŞ, G.; TURAN, S.; KARA, F., Seramik Karolarda Görülen Hatalar ve Karakterizasyonu. 20. Uluslararası Katılımlı Ulusal Elektron Mikroskopi Kongresi, 2011-10-25, 2011-10-28, , Turkey, . 25

1. Açıkbaş, G.; Turan, S.; Kara, F., Seramik Karolarda Görülen Hatalar ve Karakterizasyonu. 20. Uluslararası Katılımlı Ulusal Elektron Mikroskopi Kongresi, 2011-10-25, 2011-10-28, Antalya, Turkey, 2011. 25
http://www.temd.org/etkinlikler/27/kongreler/20/20-ulusal-elektron-mikroskopi-kongresi-uluslararasi-katilimli

National - Manager 500

7. Effect of Sintering Regime on Microstructure Development of Diopside-Based Glazes, BAP, Project Number: 2023-1-AP5-4915, 65000 TL, Manager, Continue... 100

6. Development of self-healing and advanced native micro-nano hybrid dental filling composites and determination of their in-vitro performance, projects.kurumlar.34, Project Number: 2022-B-03 ?????, 1400000 TL, Manager, Continue... 0

5. , BAP, Project Number: , 65000 TL, Manager, 2024,Completed. 100

4. , BAP, Project Number: , 15000 TL, Manager, 2024,Completed. 100

3. Development and Characterization of Cu-Doped ZnO-Modified Hybrid Composite Ceramic Surfaces, projects.kurumlar.21, Project Number: 222M???, 60000 TL, Manager, 2024,Completed. 0

2. , BAP, Project Number: , 40000 TL, Manager, 2024,Completed. 100

1. , BAP, Project Number: , 11497 TL, Manager, 2018,Completed. 100

National - Researcher 400

8. , BAP, Project Number: , 31390 TL, Researcher, 2021,Completed. 50

7. , BAP, Project Number: , 11873 TL, Researcher, 2019,Completed. 50

6. , BAP, Project Number: , 12932 TL, Researcher, 2018,Completed. 50

5. , BAP, Project Number: , 9970 TL, Researcher, 2017,Completed. 50

4. , BAP, Project Number: , 15000 TL, Researcher, 2016,Completed. 50

3. , BAP, Project Number: , 10000 TL, Researcher, 2016,Completed. 50

2. , BAP, Project Number: , 9969 TL, Researcher, 2015,Completed. 50

1. , BAP, Project Number: , 9989 TL, Researcher, 2013,Completed. 50

National - Advisor 0

2. , TÜBİTAK, Project Number: , 4000 TL, Advisor, 2023,Completed. 0

1. , BAP, Project Number: , 20000 TL, Advisor, 2019,Completed. 0

International
1. AÇIKBAŞ, G. ; GÖÇMEZ, H. , Patent, . 2000
2. AÇIKBAŞ, N. ; Açıkbaş, G. ; Özcan, S. , Patent, . 2000
National
1. Çalış Açıkbaş, N. ; Açıkbaş, G. ; Özcan, S. A method for obtaining superhydrophobic surfaces by inorganic surface modification, Patent, 2017-08-21. 1000
2. Açıkbaş, G. ; Göçmez, H. A Method for the Production of Alternative Products to Ceramic Sanitarware Products Using Polymer Matrix Ceramic Reinforced Composites, Patent, 2018-04-24. 1000
Patents_001.pdf
Supervised Master Theses 700

4. Oğuzhan Can, Investigation of properties and manufacturability of bioparticule reinforced polymer matrix biocomposites, Graduate School of Natural and Applied Sciences, Eskişehir Osmangazi University, Completed. 150
https://tez.yok.gov.tr/UlusalTezMerkezi/tezSorguSonucYeni.jsp

3. Deniz Bertan, INVESTIGATION OF PHYSICO-MECHANICAL PROPERTIES OF GLASS FIBRE REINFORCED POLYESTER MATRIX COMPOSITE MATERIALS WITH MODIFIED NANOCLAYS UNDER DIFFERENT ENVIRONMENTAL CONDITIONS, Graduate School of Natural and Applied Sciences, Mersin University, 2024, Completed. 200

2. Halil Hindi, INVESTIGATION OF THE EFFECT OF DETERIORATION OF CERAMIC WASTES AND FUNCTIONAL COATING MATERIALS ON POLYMER MATRIX COMPOSITE PRODUCT PROPERTIES, Graduate School of Natural and Applied Sciences, Mersin University, 2024, Completed. 200

1. Mehmet Behlül Kayalı, INVESTIGATION OF ANTIBACTERIAL AND SUPERHYDROPHOBIC PROPERTIES OF ZINC OXIDE MODIFIED PORCELAIN TILE GLAZES, Graduate School of Natural and Applied Sciences, Bilecik University, 2021, Completed. 150

International Journal [Year, Count] 65
1. INDUSTRIAL LUBRICATION AND TRIBOLOGY , [ 2018 : 1 ] . 5
2. IRANIAN POLYMER JOURNAL , [ 2020 : 1 ] [ 2018 : 4 ] [ 2017 : 4 ] [ 2016 : 1 ] [ 2021 : 1 ] . 55
3. WASTE AND BIOMASS VALORIZATION , [ 2018 : 1 ] . 5
National Journal [Year, Count] 3
1. INTERNATIONAL SCIENTIFIC AND VOCATIONAL STUDIES JOURNAL , [ 2018 : 1 ] [ 2019 : 1 ] . 2
2. THE BLACK SEA JOURNAL OF SCIENCES , [ 2017 : 1 ] . 1
International
1. 2. ULUSLARARASI MÜHENDİSLİK MİMARLIK VE TASARIM KONGRESİ KARMA SERGİSİ, , , , 2017-05-12-2017-05-13, 2 Gün, Kocaeli, Turkey
International 50
1. Micro World Themed Microstructure Photography Competition SERES 2014-Anadolu University, 2014-07-11, Eskişehir, Turkey. 0
2. Best Presentation Award World Academy of Science, Engineering and Technology (WASET) , 2017-05-05, Roma, Italy. 50
3. , , , Italy. 0
National 0
1. , , , Turkey. 0

"A World University In The Light of Science and Modernity"