Slide background
Mersin Üniversitesi

  Assoc.Professor Memduh Kara
users.ozgecmis
:
Department
:
Faculty of Engineering/Department of Mechanical Engineering .
Business Address
:
.
Phone
:
+90-324-3610001 .
Internal
:
17307 .
Fax
:
+90-- .
Alternative e-mail
:
Alternative e-mail
:
Created
:
2016-12-31 12:31:55 .
Last Modification
:
2022-11-07 10:58:45 .
Researcher ID :
Scopus ID :
Orcid ID :
Scholar ID :
h-index :
8
Publons ID :
Point :

Degree Department/Program Institute Year
2002
MASTER MECHANICAL ENGINEERING SELCUK UNIVERSITY 2006
DOCTORAL MECHANICAL ENGINEERING SELCUK UNIVERSITY 2012
BACHELOR DEGREE MECHANICAL ENGINEERING NECMETTIN ERBAKAN UNIVERSITY 2021
Doctorate Thesis

1. FAILURE BEHAVIOR OF FILAMENT WOUND GRP PIPES UNDER INTERNAL PRESSURE REPAIRED WITH PATCH AFTER LOW VELOCITY IMPACT, Supervisor: Dr. Ahmet AVCI, Selçuk University, Graduate School of Natural and Applied Sciences, Mechanical Engineering Department, Konya, Turkey, 2012.

Master Thesis

1. DYNAMIC RESPONSE OF LAMINATED COMPOSITES SUBJECTED TO LOW-VELOCITY IMPACT, Supervisor: Dr. Mesut UYANER, Selçuk University, Graduate School of Natural and Applied Sciences, Mechanical Engineering Department, Konya, Turkey, 2006.

Title Dutie Institution/Other Year
2017-11-17 - Continue
2017-11-17 - Continue
2018-07-26 - 2021-07-24
- - - 2015-09-01 - 2017-04-15
DEKAN YARDIMCILIGI FAKULTE DEKAN YARDIMCISI N.E.U. SEYDISEHIR AHMET CENGIZ MUH. FAK. 2014-10-10 - 2015-08-11
BOLUM BASKANI METALL. VE MLZ. MUH. BOL. BSK. N.E.U. SEYDISEHIR AHMET CENGIZ MUH. FAK. 2014-07-09 - 2015-08-11
MUDUR YARDIMCISI YUKSEKOKUL MUDUR YARDIMCISI S.U. KADINHANI FAIK ICIL MESLEK YUKSEKOKULU 2014-03-17 - 2014-07-07
BOLUM BASKANI ELEKTRIK VE ENERJI BOLUMU BOLUM BASKANI S.U. KADINHANI FAIK ICIL MESLEK YUKSEKOKULU 2012-09-12 - 2014-07-07
BOLUM BASKAN YARDIMCILIGI TEKNIK PROGRAMLAR BOLUM BASKAN YARDIMCILIGI S.U. KADINHANI FAIK ICIL MESLEK YUKSEKOKULU 2008-08-19 - 2010-08-19
BOLUM BASKAN YARDIMCILIGI TEKNIK PROGRAMLAR BOLUM BASKAN YARDIMCILIGI KADINHANI FAIK ICIL MESLEK YUKSEKOKULU 2006-12-28 - 2008-08-19
International - SCI/SCI-Expanded category 21250
2022
22. KARA, M.; NOMER, A.; KEPİR, Y.; GÜNÖZ, A.; AVCI, A. Low-energy repeated impact response of nanoparticle reinforced carbon fiber epoxy composite pipes. COMPOSITE STRUCTURES, 2022, 299, 1-12. 900 + 0
https://www.sciencedirect.com/science/article/pii/S0263822322008388

21. KARA, M.; COŞKUN, T.; GÜNÖZ, A. Effect of WC particles on the mechanical behavior and machinability of aluminum matrix composites. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS, PART C: JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 2022, 236, 10122-10130. 1000 + 0
http:https://journals.sagepub.com/doi/abs/10.1177/09544062221098864//

20. KARA, M.; COŞKUN, T.; GÜNÖZ, A. Influence of B4C on Enhancing Mechanical Properties of AA2014 Aluminum Matrix Composites. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS, PART C: JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 2022, , -. 1000 + 0
10.1177/09544062211058599

19. KARA, M.; TATAR, A.; KIRICI, M.; KEPİR, Y.; GÜNÖZ, A.; AVCI, A. . JOURNAL OF COMPOSITE MATERIALS, 2022, , -. 850 + 0
10.1177/00219983221136278

18. KEPİR, Y.; GÜNÖZ, A.; KARA, M. Nonpenetrating repeated impact effect to the damage behavior of prestressed glass/epoxy composite pipes. POLYMER COMPOSITES, 2022, 43, 5047-5058. 1000 + 0
https://onlinelibrary.wiley.com/doi/full/10.1002/pc.26777

17. UYANER, M.; KARA, M.; KEPİR, Y.; GÜNÖZ, A. . IRANIAN JOURNAL OF SCIENCE AND TECHNOLOGY, TRANSACTIONS OF MECHANICAL ENGINEERING, 2022, , -. 850 + 0
10.1007/s40997-022-00527-8

16. KEPİR, Y.; GÜNÖZ, A.; KARA, M. . POLYMER COMPOSITES, 2022, , -. 1000 + 0
10.1002/pc.26777

15. UYANER, M.; KARA, M.; KEPİR, Y.; GÜNÖZ, A. Virtual Testing of Laminated Composites Subjected to Low-Velocity Impact. IRANIAN JOURNAL OF SCIENCE AND TECHNOLOGY, TRANSACTIONS OF MECHANICAL ENGINEERING, 2022, ---. 850 + 0
https://link.springer.com/article/10.1007/s40997-022-00527-8

2021
14. SEPETÇİOĞLU, H.; GÜNÖZ, A.; KARA, M. . POLYMERS AND POLYMER COMPOSITES, 2021, 29, 166-177. 1000 + 0
10.1177/0967391121992939

13. GÜNÖZ, A.; KEPİR, Y.; KARA, M. . MATERIALS TESTING, 2021, 63, -. 1000 + 0
10.1515/mt-2020-0037

12. KARA, M.; ARAT, M.; UYANER, M. . JOURNAL OF COMPOSITE MATERIALS, 2021, 55, -. 1000 + 0
10.1177/00219983211029368

11. KARA, M.; AK, S.; UYANER, M.; GÜNÖZ, A.; KEPİR, Y. . APPLIED COMPOSITE MATERIALS, 2021, 28, 1567-1587. 900 + 0
10.1007/s10443-021-09923-w

10. TAŞYÜREK, M.; KARA, M. . JOURNAL OF COMPOSITE MATERIALS, 2021, 55, -. 1000 + 0
10.1177/0021998320961552

2018
9. KARA, M.; Kırıcı, M.; TATAR, A.; AVCI, A. . COMPOSITES PART B: ENGINEERING, 2018, 145, 145-154. 950 + 0
10.1016/j.compositesb.2018.03.027

2017
8. KARA, M.; METİÖZ, M.; UYANER, M. . TEHNICKI VJESNIK - TECHNICAL GAZETTE, 2017, 24, 383-390. 1000 + 0
10.17559/TV-20160826030731

7. KARA, M.; KIRICI, M. . COMPOSITES PART B: ENGINEERING, 2017, 123, 55-63. 1000 + 0
10.1016/j.compositesb.2017.04.021

2016
6. Gemi, L.; Kara, M.; Avci, A. Low velocity impact response of prestressed functionally graded hybrid pipes. COMPOSITES PART B: ENGINEERING, 2016, 106, 154-163. 1000 + 0
http://dx.doi.org/10.1016/j.compositesb.2016.09.025

2015
5. Kara, M.; Uyaner, M.; Avci, A. Repairing impact damaged fiber reinforced composite pipes by external wrapping with composite patches. COMPOSITE STRUCTURES, 2015, 123, 1-8. 1000 + 0
http://dx.doi.org/10.1016/j.compstruct.2014.12.017

2014
4. Uyaner, M.; Kara, M.; Şahin, A. Fatigue behavior of filament wound E-glass/epoxy composite tubes damaged by low velocity impact. COMPOSITES: PART B, 2014, 61, 358-364. 1000 + 0
http://dx.doi.org/10.1016/j.compositesb.2013.06.039

3. Kara, M.; Uyaner, M.; Avci, A.; Akdemir, A. Effect of non-penetrating impact damages of pre-stressed GRP tubes at low velocities on the burst strength. COMPOSITES: PART B, 2014, 60, 507-514. 950 + 0
http://dx.doi.org/10.1016/j.compositesb.2014.01.003

2012
2. Uyaner, M.; Kara, M. Experimental study of the impact behavior of laminated composites stricken by sharp impactors. SCIENCE AND ENGINEERING OF COMPOSITE MATERIALS, 2012, 19, 307-313. 1000 + 0
http://dx.doi.org/10.1515/secm-2011-0135

2007
1. Uyaner, M.; Kara, M. Dynamic response of laminated composites subjected to low-velocity impact. JOURNAL OF COMPOSITE MATERIALS, 2007, 41, 2877-2895. 1000 + 77

Times Cited: 13
International - Covered by Other International Indexes 600
2017
3. KARA, M.; UZUN, Y.; ARIKAN, H. Mapping with the Image Processing Method of Damage Regions with Respect Composite Laminates Subjected to Low Velocity . EUROPEAN JOURNAL OF ENGINEERING AND NATURAL SCIENCES, 2017, 2, 154-160. 200 + 0
2016
2. Karadağ, H.; Bahtlı, T.; Kara, M. The Recycling of Steel and Brass Chips to Produce Composite Materials via Cold Pressing and Sintering. THE INTERNATIONAL JOURNAL OF ENGINEERING AND SCIENCE , 2016, 5, 26-30. 200 + 0
1. Kara, M.; Uyaner, M. Low velocity impact behavior of carbon nanotube filled glass fiber/vinyl ester composites. THE INTERNATIONAL JOURNAL OF ENGINEERING AND SCIENCE , 2016, 5, 26-30. 200 + 0
International - Other 400
2021
4. KEPİR, Y.; GÜNÖZ, A.; KARA, M. . ADVANCED ENGINEERING JOURNAL, 2021, 1, 21-25. 100 + 0
2020
3. GÜNÖZ, A.; KEPİR, Y.; KARA, M. Tensile Strength Alteration of GFRP Composite Pipes Under Seawater-Dominated Conditions. JOURNAL OF FAILURE ANALYSIS AND PREVENTION, 2020, 20, 1426-1430. 100 + 0
10.1007/s11668-020-00962-2

2019
2. AYDOĞUŞ, A.; ACARER, M.; KARA, M. . SELCUK UNIVERSITY JOURNAL OF ENGINEERING SCIENCES (SUJES), 2019, 18, 199-208. 100 + 0
2017
1. KARA, M.; UZUN, Y.; ARIKAN, H. . EUROPEAN JOURNAL OF ENGINEERING AND NATURAL SCIENCES, 2017, 2, 154-160. 100 + 0
International - publications.sections.8 100
2019
1. KARA, M.; Kırıcı, M.; ÇAĞAN, S. Effects of the Number of Fatigue Cycles on the Hoop Tensile Strength of Glass Fiber/Epoxy Composite Pipes. JOURNAL OF FAILURE ANALYSIS AND PREVENTION, 2019, 19, 1181-1186. 100 + 0
10.1007/s11668-019-00720-z

National - Covered by ULAKBIM 1200
2022
6. GÜNÖZ, A.; KEPİR, Y.; KARA, M. . TURKISH JOURNAL OF ENGINEERING, 2022, 6, 34-39. 200 + 0
10.31127/tuje.775536

5. KEPİR, Y.; GÜNÖZ, A.; KARA, M. . TURKISH JOURNAL OF ENGINEERING, 2022, 6, 149-155. 200 + 0
10.31127/tuje.866955

2020
4. KAYA, L.; KARA, M.; SAYINCI, B. . TURKISH JOURNAL OF ENGINEERING, 2020, 4, 23-29. 200 + 0
2017
3. KARA, M.; UYANER, M. . SULEYMAN DEMIREL UNIVERSITESI FEN BILIMLERI ENSTITUSU DERGISI, 2017, 21, 666-672. 200 + 0
10.19113/sdufbed.50178

2016
2. Uyaner, M.; Kara, M. THE INFLUENCE OF IMPACTOR GEOMETRY ON THE IMPACT RESPONSE OF E-GLASS/EPOKSY COMPOSITE PIPES. ANADOLU UNIVERSITY JOURNAL OF SCIENCE AND TECHNOLOGY–A APPLIED SCIENCES AND ENGINEERING , 2016, 49, 68-72. 200 + 0
10.18038/btda.68342

1. Kara, M.; Uyaner, M. Investigation of Low Velocity Transverse Impact Behavior of Metal Laminated Composites. SELCUK UNIVERSITESI MUHENDISLIK, BILIM VE TEKNOLOJI DERGISI, 2016, 4, 256-270. 200 + 0
10.15317/Scitech.2016.56

International - Full text - Oral 10980

62. KOSALI, O.; KARA, M., Hidrotermal Yaşlandırılmaya Maruz Bırakılan Karbon Elyaf Epoksi Kompozit Boruların Kırılma Tokluklarının İncelenmesi. Cukurova 6th Internatıonal Scıentıfıc Researches Conference, 2021-03-05, , Adana, Turkey, . 200

61. KOSALI, O.; KARA, M., Karbon Elyaf Epoksi Kompozit Boruların Kırılma Tokluğuna Nanopartikül Takviyesinin Etkisi. Cukurova 6th Internatıonal Scıentıfıc Researches Conference, 2021-03-05, , Adana, Turkey, . 200

60. KEPİR, Y.; GÜNÖZ, A.; KARA, M., The Effect of Internal Pressure on The Low Velocity Impact Behavior Of Composite Pipes. 3rd International African Conference on Current Studies, 2021-02-27, , Abomey-Calavi, Benin, . 200

59. KEPİR, Y.; GÜNÖZ, A.; KARA, M., The Effect of Stacking Sequence on The Mechanical Behavior of Hybrid Composite Pipes. 3rd International African Conference on Current Studies, 2021-02-27, , Abomey-Calavi, Benin, . 200

58. KEPİR, Y.; GEZER, U.; DEMİR, B.; KARA, M.; GÜNÖZ, A., Numerical Investigation of Low-Velocity Impact Response of Carbon/Glass Epoxy Composites. 3rd International Conference on Applied Engineering and Natural Sciences, 2022-07-20, 2022-07-23, Konya, Turkey, . 120

57. KEPİR, Y.; GEZER, U.; DEMİR, B.; KARA, M.; GÜNÖZ, A., Numerical Investigation of Low-Velocity Impact Response of Carbon/Glass Epoxy Composites. 3rd International Conference on Applied Engineering and Natural Sciences, 2022-07-20, 2022-07-23, Konya, Turkey, 2022. 120
https://drive.google.com/file/d/1jpoZ16MqU4M4T4FzzRL4bOMLTWq_AUXr/view

56. GEZER, U.; KEPİR, Y.; DEMİR, B.; KARA, M.; GÜNÖZ, A., Finite Element Analysis of ARALL Composites by Using LS-DYNA Software. 3rd International Conference on Applied Engineering and Natural Sciences, 2022-07-20, 2022-07-23, Konya, Turkey, . 120

55. GEZER, U.; KEPİR, Y.; DEMİR, B.; KARA, M.; GÜNÖZ, A., Finite Element Analysis of ARALL Composites by Using LS-DYNA Software. 3rd International Conference on Applied Engineering and Natural Sciences, 2022-07-20, 2022-07-23, Konya, Turkey, 2022. 120
https://drive.google.com/file/d/1jpoZ16MqU4M4T4FzzRL4bOMLTWq_AUXr/view

54. GÜNÖZ, A.; KEPİR, Y.; DEMİR, B.; KARA, M.; GEZER, U., The Effect of Process and Solution Parameters on The Size of Nanofibers Produced By The Electrospinning Method. First International Symposium Advanced Engineering Days , 2021-12-23, 2021-12-23, Mersin, Turkey, 2021. 120

53. GEZER, U.; DEMİR, B.; GÜNÖZ, A.; KARA, M.; KEPİR, Y., Different Nozzle Types in Electrospinning Applications. First International Symposium Advanced Engineering Days , 2021-12-23, 2021-12-23, Mersin, Turkey, 2021. 120

52. KEPİR, Y.; GÜNÖZ, A.; KARA, M., Effect of Environmental Conditions on The Mechanical Properties of Composite Tubes. First International Symposium Advanced Engineering Days , 2021-12-23, 2021-12-23, Mersin, Turkey, 2021. 200
Scientific_Meetings_003.pdf

51. KOSALI, O.; KARA, M., Hidrotermal Yaşlandırılmaya Maruz Bırakılan Karbon Elyaf Epoksi Kompozit Boruların Kırılma Tokluklarının İncelenmesi. Çukurova 6th International Scientific Researches Conference, 2021-03-05, 2021-03-06, ADANA, Turkey, 2021. 200
https://www.iksadkongre.net/

50. Kosalı, O.; Kara, M., Karbon Elyaf Epoksi Kompozit Boruların Kırılma Tokluğuna Nanopartikül Takviyesinin Etkisi. Çukurova 6th International Scientific Researches Conference, 2021-03-05, 2021-03-06, ADANA, Turkey, 2021. 200
https://www.iksadkongre.net/

49. KEPİR, Y.; GÜNÖZ, A.; KARA, M., The Effect of Internal Pressure on The Low Velocity Impact Behavior of Composite Pipes. 3rd International African Conference on Current Studies of Science, Technology & Social Sciences, 2021-02-27, 2021-02-28, Abomey-Calavi, Benin, 2021. 200

48. KEPİR, Y.; GÜNÖZ, A.; KARA, M., The Effect of Stacking Sequence on The Mechanical Behavior of Hybrid Composite Pipes. 3rd International African Conference on Current Studies of Science, Technology & Social Sciences, 2021-02-27, 2021-02-28, Abomey-Calavi, Turkey, 2021. 200
Scientific_Meetings_004.pdf

47. KEPİR, Y.; GÜNÖZ, A.; KARA, M.; İLHAN, A.; BAZ, C.; AKGÖZ, E., Hidrotermal Yaşlandırma Ünitesi Tasarımı ve İmalatı. 3. Uluslarası Akademik Araştırmalar Kongresi, 2020-07-20, 2020-07-22, BOLU, Turkey, . 130

46. KEPİR, Y.; GÜNÖZ, A.; KARA, M., Rüzgar Türbini Kanat Profilinin Farklı Türbülans Modelleriyle Aerodinamik Performansının Karşılaştırılması. 3. Uluslararası Akademik Araştırmalar Kongresi, 2020-07-20, 2020-07-22, BOLU, Turkey, . 200

45. KEPİR, Y.; GÜNÖZ, A.; KARA, M.; İLHAN, A.; BAZ, C.; AKGÖZ, E., Hidrotermal Yaşlandırma Ünitesi Tasarımı ve İmalatı. 3. Uluslararası Akademik Araştırmalar Kongresi, 2020-07-20, 2020-07-22, Bolu, Turkey, 2020. 130

44. KEPİR, Y.; GÜNÖZ, A.; KARA, M., Rüzgar Türbini Kanat Profilinin Farklı Türbülans Modelleriyle Aerodinamik Performansının Karşılaştırılması. 3. Uluslararası Akademik Araştırmalar Kongresi, 2020-07-20, 2020-07-22, Bolu, Turkey, 2020. 200

43. SOYTÜRK, F.; BERKİL, M.; KARA, M.; KEPİR, Y.; GÜNÖZ, A., Metaller İçin Yüzey Parlatma ve Temizleme Cihazı Tasarımı. 3. International Conference on Materials Science, Mechanical and Automotive Engineerings and Technology (IMSMATEC’xx20), 2020-06-24, 2020-06-26, Nevşehir, Turkey, . 140

42. KEPİR, Y.; GÜNÖZ, A.; KARA, M., Kompozit Malzemelerin Tamiri ve Kendi Kendini Tamir Edebilen Kompozitler. 3. International Conference on Materials Science, Mechanical and Automotive Engineerings and Technology (IMSMATEC’xx20), 2020-06-24, 2020-06-26, Nevşehir, Turkey, . 200

41. SOYTÜRK, F.; BERKİL, M.; KARA, M.; KEPİR, Y.; GÜNÖZ, A., Metaller için Yüzey Parlatma ve Temizleme Cihazı Tasarımı. 3. International Conference on Materials Science, Mechanical and Automotive Engineerings and Technology , 2020-06-24, 2020-06-26, Nevşehir, Turkey, 2020. 140

40. KEPİR, Y.; GÜNÖZ, A.; KARA, M., Kompozit Malzemelerin Tamiri ve Kendi Kendini Tamir Edebilen Kompozitler. 3. International Conference on Materials Science, Mechanical and Automotive Engineerings and Technology , 2020-06-24, 2020-06-26, Nevşehir, Turkey, 2020. 200

39. GÜNÖZ, A.; KEPİR, Y.; KARA, M., Akıllı Nanokompozit Kaplamalar ve Korozyona Etkileri. 3. International Conference on Materials Science, Mechanical and Automotive Engineerings and Technology , 2020-06-24, 2020-06-26, Nevşehir, Turkey, 2020. 200

38. GÜNÖZ, A.; KEPİR, Y.; KARA, M., Akıllı Nanokompozit Kaplamalar ve Korozyona Etkileri. 3. International Conference on Materials Science, Mechanical and Automotive Engineerings and Technology (IMSMATEC’xx20), 2020-06-24, 2020-06-26, Nevşehir, Turkey, . 200

37. GÜNÖZ, A.; KEPİR, Y.; KARA, M., Effect Of Seawater Ageing On The Hardness Properties Of GFRP Composite Pipes. 2nd Cilicia International Symposium on Engineering and Technology (CISET), 2019-10-10, 2019-10-12, MERSİN, Turkey, . 200

36. GÜNÖZ, A.; KEPİR, Y.; KARA, M., Effect Of Seawater Ageing On The Mechanical Properties Of E-glass Epoxy Composite Pipes. 2nd Cilicia International Symposium on Engineering and Technology (CISET), 2019-10-10, 2019-10-12, MERSİN, Turkey, . 200

35. GÜNÖZ, A.; KEPİR, Y.; KARA, M., Effect of seawater ageing on the mechanical properties of E-glass epoxy composite pipes. 2nd Cilicia International Symposium on Engineering and Technology , 2019-10-10, 2019-10-12, Mersin, Turkey, 2019. 200

34. GÜNÖZ, A.; KEPİR, Y.; KARA, M., Effect of seawater ageing on the hardness properties of GFRP composite pipes. 2nd Cilicia International Symposium on Engineering and Technology , 2019-10-10, 2019-10-12, Mersin, Turkey, 2019. 200

33. GÜNÖZ, A.; ŞANLI, B.; KARA, M., Nanopartikül Katkılı Karbon Elyaf Epoksi Boruların Isıl Özelliklerine Hidrotermal Yaşlandırmanın Etkisi. 4th International Mediterranean Science and Engineering Congress, 2019-04-25, 2019-08-27, Antalya, Turkey, 2019. 200

32. GÜNÖZ, A.; ŞANLI, B.; KARA, M., Nanopartikül Katkılı Karbon Elyaf Epoksi Boruların Isıl Özelliklerine Hidrotermal Yaşlandırmanın Etkisi. 4th International Mediterranean Science and Engineering Congress(IMSEC 2019), 2019-04-25, 2019-04-27, ANTALYA, Turkey, . 200

31. GÜNÖZ, A.; ŞANLI, B.; KARA, M., BN Nanopartikül Takviyeli Karbon Epoksi Borularda Hidrotermal Yaşlandırmanın Isıl İletkenlik Üzerine Etkisi. 3rd International Mediterranean Science and Engineering Congress (IMSEC 2018), 2018-10-24, 2018-10-26, ADANA, Turkey, 2018. 200

30. Nomer, A.; KARA, M.; AVCI, A., Karbon Elyaf Epoksi Kompozit Boruların Tekrarlı Darbeye Bağlı Enerji Yutma Kapasitesine Nanopartikül Takviyesinin Etkisi. 3rd International Mediterranean Science and Engineering Congress (IMSEC 2018), 2018-10-24, 2018-10-26, ADANA, Turkey, 2018. 200

29. NOMER, A.; KARA, M.; AVCI, A., Karbon Elyaf Epoksi Kompozit Boruların Tekrarlı Darbeye Bağlı Enerji Yutma Kapasitesine Nanopartikül Takviyesinin Etkisi. 3rd International Mediterranean Science and Engineering Congress, 2018-10-24, 2018-10-26, ADANA, Turkey, . 200

28. TAŞYÜREK, M.; KARA, M., Low-Velocity Impact Response of PreStressed GRP Tubes Reinforced with Carbon Nanotubes. IV. International Conference on Engeneering and Natural Sciences, 2018-05-02, 2018-05-06, Kyiv, Ukraine, . 200

27. TAŞYÜREK, M.; KARA, M., Low-Velocity Impact Response of Pre- Stressed GRP Tubes Reinforced with Carbon Nanotubes. 4th International Conference on Engineering and Natural Sciences (ICENS 2018), 2018-05-02, 2018-05-06, KIEV, Ukraine, 2018. 200

26. KAMACI, E.; KARA, M., Erdemli Bölgesinde Bir Bağ Evi İçin Rüzgâr Türbini Tasarımı. Uluslararası Erdemli Sempozyumu, 2018-04-19, 2018-04-21, Erdemli/MERSİN, Turkey, 2018. 200

25. SAVCI, İ.; KARA, M., Solar Chimney Design for Fulfilling the Energy Need for 4-Apartment Houses in a 2- Storey Building in the Erdemli District. International Erdemli Symposium, 2018-04-19, 2018-04-21, MERSİN, Turkey, . 200

24. KAMACI, E.; KARA, M., Wind Turbine Design for a Bond House in the Erdemli Region. International Erdemli Symposium, 2018-04-19, 2018-04-21, MERSİN, Turkey, . 200

23. COŞAR, E.; DİLSEL, E.; ÇELİK, A.; KOYUNSEVER, A.; YILDIZ, F.; ULUSOY, E.; KARA, M., Erdemli İlçesi için 500 kW Kapasiteli Güneş Enerjisi Santrali Tasarımı. International Erdemli Symposium, 2018-04-19, 2018-04-21, MERSİN, Turkey, . 40

22. SAVCI, İ.; KARA, M., Erdemli İlçesinde 2 Katlı 4 Daireli Bir Yapının Enerji İhtiyacının Karşılanması İçin Güneş Bacası Tasarımı. Uluslararası Erdemli Sempozyumu, 2018-04-19, 2018-04-21, Erdemli/MERSİN, Turkey, 2018. 200

21. COŞAR, E.; DİLSEL, E.; ÇELİK, A.; KOYUNSEVER, A.; YILDIZ, F.; ULUSOY, E.; KARA, M., Erdemli İlçesi için 500 kW Kapasiteli Güneş Enerjisi Santrali Tasarımı. Uluslararası Erdemli Sempozyumu, 2018-04-19, 2018-04-21, Erdemli/MERSİN, Turkey, 2018. 40

20. ÇELİK, A.; COŞAR, E.; KOYUNSEVER, A.; DİLSEL, E.; YILDIZ, F.; ULUSOY, E.; KARA, M., Erdemli İlçesi için Yapılarda Optimum Yalıtım Kalınlığı ve Yalıtımın Maliyete Etkisi. Uluslararası Erdemli Sempozyumu, 2018-04-19, 2018-04-21, Erdemli/MERSİN, Turkey, 2018. 40

19. ÇELİK, A.; COŞAR, E.; KOYUNSEVER, A.; DİLSEL, E.; YILDIZ, F.; ULUSOY, E.; KARA, M., Optimum Insulation Thickness and the Effect of Insulation to Building Cost for Erdemli Distric. International Erdemli Symposium, 2018-04-19, 2018-04-21, MERSİN, Turkey, . 40

18. KARA, M.; TATAR, A.; KIRICI, M.; AVCI, A., Boron Nitrit Nanopartikül Katkılı Karbon Fiber Epoksi Kompozit Boruların Kriyojenik Ortam Şartlarında Düşük Hızlı Darbe Davranışı. 3. Uluslararası Lif ve Polimer Sempozyumu, 2018-03-08, 2018-03-09, Bursa, Turkey, 2018. 190

17. KARA, M.; AVCI, A.; TATAR, A.; KIRICI, M., Boron Nitrit Nanopartikül Katkılı Karbon Fiber/Epoksi Kompozit Boruların Kriyojenik Ortam Şartlarında Düşük Hızlı Darbe Davranışı. 3. Uluslararası Lif ve Polimer Araştırmaları Sempozyumu, 2018-03-08, 2018-03-09, BURSA, Turkey, . 190

16. KARA, M.; AKIN, Y., Effect of Hydrothermal Ageing on The Mechanical Properties of FRP Composite Tubes.. International Conference on Engineering Technologies, 2017-12-07, 2017-12-09, Konya, Turkey, 2017. 200

15. KARA, M.; AK, S., Effect of Hydrothermal Ageing on the Mechanical Properties of Carbon Fiber Reinforced Nanocomposite Pipes Containing Carbon Nanotube and Boron Nitride Nanodisc. 8th International Advanced Technologies Symposium, 2017-10-19, 2017-10-22, Elazığ, Turkey, 2017. 200

14. Arat, M.; Uyaner, M.; Kara, M., Kriyojenik Ortam Şartlarında Filaman Sarım Ctp Boruların Düşük Hızlı Darbe Sonrası Hasar Davranışının İncelenmesi. 1st International Mediterranean Science and Engineering Congress, 2016-10-26, 2016-10-28, Adana, Turkey, 2016. 200

13. Kara, M.; Kara, M., İç Basınç Altında Yorulmuş Filaman Sarım Ctp Boruların Düşük Hızlı Darbe Sonrası Hasar Davranışlarının İncelenmesi. 1st International Conference on Engineering Technology and Applied Sciences, 2016-04-21, 2016-04-22, AfyonKarahisar, Turkey, 2016. 200

12. Kara, M.; Kırıcı, M.; Uyaner, M., Tekrarlanan Darbeye Maruz E-Camı/Epoksi Kompozit Boruların Hasar Davranışları. 1st International Conference on Engineering Technology and Applied Sciences, 2016-04-21, 2016-04-22, AfyonKarahisar, Turkey, 2016. 200

11. Eryılmaz, M.; Uludağ, M.; Kara, M.; Dışpınar, D., AlCu4Ti Alaşımın Farklı Döküm Sıcaklıklarında Döküm Kalitesi ile Yaşlandırma Arasındaki İlişkinin İncelenmesi. 2nd Internatıonal Symposıum on Innovatıve Technologıes in Engıneerıng and Scıence , 2014-06-18, 2014-06-20, Karabük, Turkey, 2014. 150

10. Kara, M.; Uyaner, M.; Avcı, A., İç Basınç Altındaki Filaman Sarım Ctp Kompozit Boruların Düşük Hızlı Darbe Cevabı. 9. Uluslararası Kırılma Konferansı, 2011-10-19, 2011-10-21, İstanbul, Turkey, 2011. 200

9. Akdemir, A.; Arıkan, H.; Erdem, Y.; Kara, M.; Uyaner, M., Çelik Talaşı / Silikon Kompozit Malzeme Üretimi Ve Düşük Hızlı Darbe Özelliklerinin Deneysel İncelenmesi. 9. Uluslararası Kırılma Konferansı, 2011-10-19, 2011-10-21, İstanbul, Turkey, 2011. 120

8. Uyaner, M.; Kara, M.; Şahin, A., Düşük Hızlı Darbe Görmüş Filaman Sarım E-Camı/Epoksi Boruların İç Basınç Altında Yorulma Davranışlarının İncelenmesi. 9. Uluslararası Kırılma Konferansı, 2011-10-19, 2011-10-21, İstanbul, Turkey, 2011. 200

7. Kara, M.; Yüce, İ.; Işık, M.; Uyaner, M., Dairesel Kompozit Tabakalarda Düşük Hızlı Darbe Hasarının İncelenmesi. 13th International Materials Symposium (IMSP’2010), 2010-10-13, 2010-10-15, Denizli, Turkey, 2010. 190

6. Uyaner, M.; Kara, M.; Gemi, L., Filaman Sarım E-Camı/Epoksi Kompozit Boruların Düşük Hızlı Darbe Sonrası Mukavemeti. 13th International Materials Symposium (IMSP’2010), 2010-10-13, 2010-10-15, Denizli, Turkey, 2010. 200

5. Kara, M.; Uyaner, M.; Avcı, A., Kompozit Yama Yapılmış E-Camı/Epoksi Tabakalı Kompozitlerin Düşük Hızlı Darbe Cevabı. 12th International Materials Symposium (IMSP’2008), 2008-10-15, 2008-10-17, Denizli, Turkey, 2008. 200

4. Yapıcı, A.; Metin, M.; Uyaner, M.; Kara, M.; Eskizeybek, V., Effect of Low Velocity Impact Damage on Composite Plates. 13th International Conference on Applied Mechanics & Mechanical Engineering, 2008-05-27, 2008-05-29, Kahire, Egypt, 2008. 120

3. Uyaner, M.; Kara, M., Tabakalı Kompozitlerin Darbe Cevabına Vurucu Şeklinin Etkisi. 8. Uluslar Arası Kırılma Konferansı, 2007-11-07, 2007-11-09, İstanbul, Turkey, 2007. 200

2. Uyaner, M.; Kara, M.; Ataberk, N., E-Camı/Epoksi Tabakalı Kompozitlerin Düşük Hızlı Darbe Davranışına Numune Boyutlarının Etkisi. 8. Uluslararası Kırılma Konferansı, 2007-11-07, 2007-11-09, İstanbul, Turkey, 2007. 200

1. Uyaner, M.; Kara, M.; Ataberk, N., Impact Behavior of E-Glass/Epoxy Laminated Composite. 7. Uluslararası Kırılma Konferansı, 2005-10-19, 2005-10-21, Kocaeli, Turkey, 2005. 200

International - Abstract - Oral 100

1. Kara, M.; Uzun, Y.; Arıkan, H., Mappıng Wıth The Image Processıng Method Of Damage Regıons Wıth Respect Composite Laminates Subjected To Low Velocıty Impact. International Conference on Engeneering and Natural Sciences, 2016-05-26, 2016-05-28, SarayBosna, Bosnia and Herzegovina, 2016. 100

National - Full text - Oral 200

2. KARA, M.; AKIN, Y., Effect of Hydrothermal Ageing on The Mechanical Properties of FRP Composite Tubes. International Conference on Engineering Technologies, 2017-12-07, 2017-12-09, Konya, Turkey, . 100

1. KARA, M.; AK, S., Effect of Hydrothermal Ageing on the Mechanical Properties of Carbon Fiber Reinforced Nanocomposite Pipes Containing Carbon Nanotube and Boron Nitride Nanodisc. 8th International Advanced Technologies Symposium, 2017-10-19, 2017-10-22, Elazığ, Turkey, . 100

National - Manager 600

6. THE EFFECT OF HYDROTHERMAL AGİNG PROCESS ON FRACTURE TOUGHNESS OF NANOPARTİCLE REİNFORCED COMPOSİTE MATERİALS, BAP, Project Number: 2019-3-TP2-3688, 13000 TL, Manager, Continue... 100

5. Mechanical Properties of Composite Materials Under Different Environmental Conditions, BAP, Project Number: 2022-1-TP2-4624, 14983 TL, Manager, Continue... 100

4. Effect of Hydrothermal Aging on Mechanical Properties of Hybrid Composite Materials, BAP, Project Number: 2019-3-TP2-3685, 13000 TL, Manager, Continue... 100

3. Investigation of mechanical properties and damage behavior of functionally graded kevlar-carbon/epoxy nanocomposites reinforced with polyamide nanofiber, BAP, Project Number: 2021-2-TP3-4409, 25000 TL, Manager, Continue... 100

2. ETİAL 221(LM11) Alaşımında tane boyutunun ve hidrojen içeriğinin yaşlandırmaya etkisi, BAP, Project Number: 14201038, 0 TL, Manager, 2017,Completed. 100

1. Aisi 1040 çeliğinin indüksiyonla sertleştirilmesinde parça büyüklüğünün etkisi, BAP, Project Number: 11201115, 6000 TL, Manager, 2014,Completed. 100

National - Researcher 100

2. Düşük hızlı darbeye maruz filaman sarım CTP kompozit boruların iç basınç etkisi altında yorulma davranışının incelenmesi, BAP, Project Number: 08401118, 15000 TL, Researcher, 2011,Completed. 50

1. Tabakalı kompozit malzemelerin darbe davranışı, BAP, Project Number: 2004/118, 15000 TL, Researcher, 2006,Completed. 50

Supervised Master Theses 2450

13. Dergah UYSAL, Investigation of the effects of manufacturing parameters on the micro hardness values on screw threads of wind turbine plant critical fittings, Graduate School of Natural and Applied Sciences, Mersin University, Completed. 200
https://tez.yok.gov.tr/UlusalTezMerkezi/SearchTezWS?key=kScA8XnrRb0WogX-qPGFkl-5-3j6KJzsoyQS5__RfdOy3aWKL08oTuePO1wkZfYl

12. İsmet Can BELLER, Investigation of the physical properties of armor steel after cataphoresis coating, Graduate School of Natural and Applied Sciences, Mersin University, Completed. 200
https://tez.yok.gov.tr/UlusalTezMerkezi/SearchTezWS?key=tqUiYt63sTQLTpozMJ92QmHkLkbLykhxlkEmPaBwfwK6uCoYbZUbDhTqfubbHC-P

11. Tolga COŞKUN, Production of Ceramic Particulated Reinforced Aluminum Composite Materials, Graduate School of Natural and Applied Sciences, Mersin University, Completed. 200
https://tez.yok.gov.tr/UlusalTezMerkezi/SearchTezWS?key=_F5QEpayDXGqGZlp9XiFtFxTQsdIW0MJZxaWZGSA6av9gg7TSr7LU_0nZ1bnCjK8

10. Oğuzhan KOSALI, The effect of hydrothermal aging on the cracking toughness of nanoparticle reinforced composite materials, Graduate School of Natural and Applied Sciences, Mersin University, Completed. 200
https://tez.yok.gov.tr/UlusalTezMerkezi/SearchTezWS?key=8tbPippmWV_b-Irrn9YEAqUi8ifEnN0U-9cVJgNyxRa7pm1XjuPX8czXEoio9Hpu

9. Yusuf KEPİR, Effect of hydrothermal aging on the mechanical properties of hybrid composite materials, Graduate School of Natural and Applied Sciences, Mersin University, Completed. 200
https://tez.yok.gov.tr/UlusalTezMerkezi/SearchTezWS?key=5XiSE4yCP_gmnukpMEp65cplgLNTlHX2-_nC5xHxGBPebGnX58t5xHud_Ur1JLHq

8. Safa AK, The effect of hydrothermal aging on the mechanical properties of carbon fiber-epoxy composite pipes with carbon nanotube and boron nitride nano particles, Graduate School of Natural and Applied Sciences, Others, Completed. 200
https://tez.yok.gov.tr/UlusalTezMerkezi/SearchTezWS?key=Mir2lXQK1dkmQ9Ige3PZbvoPjENazSSEvg8VwlfMrWKtVqfxNb5o2sJVrB0oe4MK

7. Burak MUTLU, Numerical and experimental investigation of the effect of cyclone immersion tube length and shape on cyclone efficiency and pressure loss, Graduate School of Natural and Applied Sciences, Mersin University, 2021, Completed. 200
https://tez.yok.gov.tr/UlusalTezMerkezi/SearchTezWS?key=tqUiYt63sTQLTpozMJ92QmRt8nES1In7tos7esIujPWszjFgt33WEuyB3sB7VwzK

6. Alper GÜNÖZ, THE EFFECT OF HYDROTERMAL AGING ON THERMAL CONDUCTIVITY IN NANOPARTICLE REINFORCED CARBON EPOXY PIPES, Graduate School of Natural and Applied Sciences, Mersin University, 2019, Completed. 150
https://tez.yok.gov.tr/UlusalTezMerkezi/SearchTezWS?key=Mir2lXQK1dkmQ9Ige3PZbtqhaAKesh76_orA-atGa9crxVxZh-vofkQAsjD437Hd

5. Anıl Erdağ NOMER, DAMAGE BEHAVIOR OF CARBON FIBER EPOXY PIPES WHICH CONTAINING NANOPARTICLES, AFTER REPEATED IMPACT EVENT, Graduate School of Natural and Applied Sciences, Mersin University, 2019, Completed. 200
https://tez.yok.gov.tr/UlusalTezMerkezi/SearchTezWS?key=Mir2lXQK1dkmQ9Ige3PZbgt3gcU_Nnefb7aHXoodpACWhTjwLiZyxv_TO157Lqi6

4. Yasin AKIN, Effect of hydrothermal ageing on the mechanical properties of grp composite tubes, Graduate School of Natural and Applied Sciences, Others, 2018, Completed. 200
https://tez.yok.gov.tr/UlusalTezMerkezi/SearchTezWS?key=hcgrYffRbz0Z44UJEuLtwekJ28QbX2Nvg5bSYHQDZR4iYaYRB8jqQzEt2KRp10Wr

3. Mustafa ARAT, Investigation of damage behaviour of filament wound GFRP tubes after low velocity impact in cryogenic environmental conditions, Graduate School of Natural and Applied Sciences, Selçuk University, 2017, Completed. 150
https://tez.yok.gov.tr/UlusalTezMerkezi/SearchTezWS?key=DPTyuy3wRPq_qvCPSqUB63gIQo8myECwKPU7_QeCwzC3viQNYU35px-s4n99xi3Q

2. Muhammed KIRICI, Investigation of failure behaviour after low velocity impact of filament wound GRP pipes that exposed fatigue under internal pressure, Graduate School of Natural and Applied Sciences, Selçuk University, 2016, Completed. 200
https://tez.yok.gov.tr/UlusalTezMerkezi/SearchTezWS?key=DPTyuy3wRPq_qvCPSqUB61huDeG4QifUfyVMjJ7RFelGxmiTd3XxbPP6zPJtWzH5

1. Müfit METİNÖZ, IMPACT RESISTANCE OF GYPSUM BOARD SUBJECTED TO LOW VELOCITY COLLISION , Graduate School of Natural and Applied Sciences, Selçuk University, 2013, Completed. 150
https://tez.yok.gov.tr/UlusalTezMerkezi/SearchTezWS?key=iTkOhwevEenJZ3onUvs52ukaJumTPOtgOlre7mbKwDalASSaw26UKqyudnAAoppb

Supervised Doctorate Theses 400

1. Alper GÜNÖZ, Investigation of The Mechanical Properties and Damage Behavior of Functionally Graded Kevlar-Carbon/Epoxy Nanocomposites With Polyamide Nanofiber Reinforcement, Graduate School of Natural and Applied Sciences, Mersin University, Completed. 400
https://tez.yok.gov.tr/UlusalTezMerkezi/tezSorguSonucYeni.jsp

International Journal [Year, Count] 140
1. JOURNAL OF COMPOSITE MATERIALS , [ 2021 : 1 ] . 5
2. JOURNAL OF PIPELINE SCIENCE AND ENGINEERING , [ 2022 : 1 ] . 5
3. ENGINEERING STRUCTURES , [ 2021 : 1 ] . 5
4. INTERNATIONAL JOURNAL OF DAMAGE MECHANICS , [ 2022 : 2 ] . 10
5. IRANIAN POLYMER JOURNAL , [ 2020 : 1 ] [ 2021 : 2 ] . 15
6. JOURNAL OF INDUSTRIAL TEXTILES , [ 2021 : 3 ] [ 2022 : 3 ] . 30
7. JOURNAL OF REINFORCED PLASTICS AND COMPOSITES , [ 2021 : 1 ] . 5
8. POLYMER COMPOSITES , [ 2022 : 5 ] . 25
9. POLYMER TESTING , [ 2019 : 1 ] [ 2022 : 5 ] . 30
10. TEXTILE RESEARCH JOURNAL , [ 2022 : 1 ] . 5
11. THIN-WALLED STRUCTURES , [ 2021 : 1 ] . 5
National Journal [Year, Count] 43
1. GAZI UNIVERSITESI FEN BILIMLERI DERGISI PART C: TASARIM VE TEKNOLOJI , [ 2021 : 1 ] . 1
2. INTERNATIONAL ADVANCED RESEARCHES AND ENGINEERING JOURNAL , [ 2018 : 2 ] . 2
3. NECMETTIN ERBAKAN UNIVERSITESI FEN VE MUHENDISLIK BILIMLERI DERGISI , [ 2019 : 1 ] . 0
4. TURKISH JOURNAL OF ENGINEERING , [ 2017 : 12 ] [ 2018 : 11 ] [ 2019 : 10 ] [ 2020 : 6 ] . 39
5. USAK UNIVERSITY JOURNAL OF ENGINEERING SCIENCES , [ 2020 : 1 ] . 1
Term C.Code Course Faculty/College/Institute Department/Program T-A-C
Fall MM417 Heating Technique Faculty of Engineering Mechanical Engineering 3-0-3
Fall MAK 225 Strength of Materials Faculty of Engineering Mechanical Engineering 4-0-4
Fall MM499 Graduation Thesis I Faculty of Engineering Mechanical Engineering 0-2-1
Fall MM491 Mechanical Installation For Buildings Faculty of Engineering Mechanical Engineering 3-0-3
Fall MAK 523 Analyses of Failure Institute of Science Department of Mechanical Engin... 3-0-3
Fall NİM 801 Special Topics In Nanotechnology and Adv... Institute of Science Department of Nanotechnology a... 4-0-0
Fall MAK 801 Special Topics In Mechanical Engineering Institute of Science Department of Mechanical Engin... 4-0-0
Term C.Code Course Faculty/College/Institute Department/Program T-A-C
Spring MM456 Solar Energy Applications Faculty of Engineering Mechanical Engineering 3-0-3
Spring MM492 Graduation Thesis II Faculty of Engineering Mechanical Engineering 0-2-1
Spring MAK112 Statics Faculty of Engineering Mechanical Engineering 4-0-4
Spring SEM DR Seminar II Institute of Science Institute of Science 0-0-0
Spring MAK 801 Special Topics In Mechanical Engineering Institute of Science Department of Mechanical Engin... 4-0-0
Spring MAK 513 Product and Operation Management Institute of Science Department of Mechanical Engin... 3-0-3
Spring NİM 801 Special Topics In Nanotechnology and Adv... Institute of Science Department of Nanotechnology a... 4-0-0
Spring MAK 562 Institute of Science Department of Mechanical Engin... 3-0-3
Spring SEM YL Seminar Institute of Science Institute of Science 0-0-0
Fall MAK205 Strength of Materials Faculty of Engineering Mechanical Engineering 4-0-4
Fall MM499 Graduation Thesis I Faculty of Engineering Mechanical Engineering 0-2-1
Fall MM491 Mechanical Installation For Buildings Faculty of Engineering Mechanical Engineering 3-0-3
Fall MM417 Heating Technique Faculty of Engineering Mechanical Engineering 3-0-3
Fall MAK 523 Analyses of Failure Institute of Science Department of Mechanical Engin... 3-0-3
Fall SEM YL Seminar Institute of Science Institute of Science 0-0-0
Fall NİM 801 Special Topics In Nanotechnology and Adv... Institute of Science Department of Nanotechnology a... 4-0-0
Fall MAK 802 Special Topics In Mechanical Engineering Institute of Science Department of Mechanical Engin... 4-0-4
Fall MAK 801 Special Topics In Mechanical Engineering Institute of Science Department of Mechanical Engin... 4-0-0
Summer MAK205 Strength of Materials Faculty of Engineering Mechanical Engineering 4-0-4
Summer MM456 Solar Energy Applications Faculty of Engineering Mechanical Engineering 3-0-3
Summer MAK205 Strength of Materials Faculty of Engineering Mechanical Engineering 4-0-4
Summer MAK112 Statics Faculty of Engineering Mechanical Engineering 4-0-4
Term C.Code Course Faculty/College/Institute Department/Program T-A-C
Spring MAK112 Statics Faculty of Engineering Mechanical Engineering 4-0-4
Spring MM404 Mechanical Engineering Testing Faculty of Engineering Mechanical Engineering 1-2-2
Spring MM492 Graduation Thesis II Faculty of Engineering Mechanical Engineering 0-2-1
Spring MM456 Solar Energy Applications Faculty of Engineering Mechanical Engineering 3-0-3
Spring MAK 801 Special Topics In Mechanical Engineering Institute of Science Department of Mechanical Engin... 4-0-0
Spring NİM 802 Special Topics In Nanotechnology and Adv... Institute of Science Department of Nanotechnology a... 4-0-0
Spring MAK704 Ergonomy For Engineers Institute of Science Mechanical Engineering ( Non -... 3-0-3
Spring MAK 523 Analyses of Failure Institute of Science Department of Mechanical Engin... 3-0-3
Spring SEM YL Seminar Institute of Science Institute of Science 0-0-0
Spring MAK 802 Special Topics In Mechanical Engineering Institute of Science Department of Mechanical Engin... 4-0-4
Spring İST 208 Natural Gas Installation Vocational School of Technical... Air Conditioning and Cooling T... 2-1-3
Fall MM417 Heating Technique Faculty of Engineering Mechanical Engineering 3-0-3
Fall MM223 Strength of Materials Faculty of Engineering Mechanical Engineering 4-0-4
Fall MM491 Mechanical Installation For Buildings Faculty of Engineering Mechanical Engineering 3-0-3
Fall MM499 Graduation Thesis I Faculty of Engineering Mechanical Engineering 0-2-1
Fall MAK 801 Special Topics In Mechanical Engineering Institute of Science Department of Mechanical Engin... 4-0-0
Fall MAK 802 Special Topics In Mechanical Engineering Institute of Science Department of Mechanical Engin... 4-0-4
Fall MAK704 Ergonomy For Engineers Institute of Science Mechanical Engineering ( Non -... 3-0-3
Fall MAK 523 Analyses of Failure Institute of Science Department of Mechanical Engin... 3-0-3
Fall NİM 802 Special Topics In Nanotechnology and Adv... Institute of Science Department of Nanotechnology a... 4-0-0
Fall SEM YL Seminar Institute of Science Institute of Science 0-0-0
Summer MAK112 Statics Faculty of Engineering Mechanical Engineering 4-0-4
Summer MM223 Strength of Materials Faculty of Engineering Mechanical Engineering 4-0-4
Summer MM456 Solar Energy Applications Faculty of Engineering Mechanical Engineering 3-0-3
Term C.Code Course Faculty/College/Institute Department/Program T-A-C
Spring MM456 Solar Energy Applications Faculty of Engineering Mechanical Engineering 3-0-3
Spring MM128 Static Faculty of Engineering Mechanical Engineering 2-2-3
Spring MM404 Mechanical Engineering Testing Faculty of Engineering Mechanical Engineering 1-2-2
Spring MM492 Graduation Thesis II Faculty of Engineering Mechanical Engineering 0-2-1
Spring MM484 Principles of Energy Conversion Faculty of Engineering Mechanical Engineering 3-0-3
Spring MAK 802 Special Topics In Mechanical Engineering Institute of Science Department of Mechanical Engin... 4-0-4
Spring MAK 801 Special Topics In Mechanical Engineering Institute of Science Department of Mechanical Engin... 4-0-0
Spring SEM YL Seminar Institute of Science Institute of Science 0-0-0
Spring MAK 523 Analyses of Failure Institute of Science Department of Mechanical Engin... 3-0-3
Spring MAK704 Ergonomy For Engineers Institute of Science Mechanical Engineering ( Non -... 3-0-3
Spring SEM DR Seminar I Institute of Science Institute of Science 0-0-0
Fall MM499 Graduation Thesis I Faculty of Engineering Mechanical Engineering 0-2-1
Fall MM491 Mechanical Installation For Buildings Faculty of Engineering Mechanical Engineering 3-0-3
Fall MM223 Strength of Materials Faculty of Engineering Mechanical Engineering 4-0-4
Fall MAK704 Ergonomy For Engineers Institute of Science Mechanical Engineering ( Non -... 3-0-3
Fall MAK 801 Special Topics In Mechanical Engineering Institute of Science Department of Mechanical Engin... 4-0-0
Fall MAK 802 Special Topics In Mechanical Engineering Institute of Science Department of Mechanical Engin... 4-0-4
Fall MAK 513 Product and Operation Management Institute of Science Department of Mechanical Engin... 3-0-3
Summer MM128 Static Faculty of Engineering Mechanical Engineering 2-2-3
Summer MM223 Strength of Materials Faculty of Engineering Mechanical Engineering 4-0-4